We have collected the most relevant information on Ft-2000 Headphone Audio Mixing Menu. Open the URLs, which are collected below, and you will find all the info you are interested in.


MENU MODE - Yaesu

    https://www.yaesu.com/downloadFile.cfm?FileID=4564&FileCatID=158&FileName=FT%2D2000%5FMenu%5FMode.pdf&FileContentType=application%2Fpdf
    Page 108 FT-2000 OPERATING MANUAL MENU MODE The Menu system of the FT-2000 provides extensive customization capability, so you can set up your transceiver just the way you want to operate it. The Menu items are grouped by general utilization category, and are numbered from “ 001 AGc FST DLY” to “149 tGEn EMRGNCY.” USING THE MENU 1.

FT-2000 - DK3HV

    http://www.dk3hv.com/Shack/FT-2000/ft-2000.html
    21 rows

FT-2000 Audio Settings and Set Up | AB4BJ

    https://ab4bj.com/wordpress/2009/09/ft-2000-audio-settings-and-set-up/
    I then entered the internal menu system and made the following settings ( Note: Once you make these settings, the “MIC EQ” display will light on the FT-2000 front panel. There is no “on/off” switch for this. It is active once you apply the EQ to your audio). Menu 85 = 3000. Menu 125 = 100.

Looking for recommended audio / EQ menu settings - FT …

    https://forums.qrz.com/index.php?threads/looking-for-recommended-audio-eq-menu-settings-ft-2000-heil-pr781-combo.452353/
    Anyone have a set of recommended TX audio and TX EQ menu settings for the FT 2000 + Heil PR781 combo? I could figure it out on my own, email Bob Heil or something and all that, but I figure someone else here has already done this, and I want to save some time twiddling and fiddling around too much. Please indicate menu item #'s and settings.

Yaesu FT-2000 Transceiver - W3YY

    http://www.w3yy.com/ft2000.htm
    3. The CW monitor can be heard using the front panel headphone jack and speaker output, but not on the rear panel audio output jack. Yaesu technical support told me on Oct 2, 2006 that this was not a fault in my FT-2000, but was a result of the FT-2000 design.

HF/50 MHZ TRANSCEIVER FT-2000 - Mobinet

    http://www.mobinet.se/Details/man10525.pdf
    The FT-2000 is an elite-class HF transceiver providing ex-ceptional performance both on transmit and receive. The FT-2000 is designed for the most competitive operating situa-tions, whether you primarily operate in contest, DX, or digi-tal-mode environments. Built on the foundation of the popular FTDX9000 transceiver,

Welcome to Yaesu.com

    https://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=66EA91711DFB68C03DED4AD35153E12C
    With the FT-2000/D, you have tremendous control over the fidelity and/or “talk power” of your SSB signal, thanks to the variable SSB bandwidth capability in the Menu. The default bandwidth is 2.4 kHz (300 – 2400 Hz @ -6 dB), but you also have selections of 50 – 3000 Hz, 100 – 2900 Hz, 200 – 2800 Hz, and 400 – 2600 Hz, allowing you ...

Adjusting Your Rig’s DSP Settings - - Heil Amateur Radio

    https://heilhamradio.com/support/dsp-settings/adjusting-your-rigs-dsp-settings/
    DSP Setting Example: Yaesu FT-950/2000 and FTdx9000 Series. These rigs use a three-band parametric equalizer system. In each of the audio “bands” (low, mid, and high-frequency areas), you can set the center frequency, amplitude, and bandwidth of equalization. Generally, the modulators of these rigs want you to roll off bass and enhance treble.

N2RIT ESSB Audio Equipment

    http://www.n2rit.com/audio/audio.html
    The audio coming out the rack gear is usually much greater than the audio front end of your radio can handle. This pad should bring the audio level down about 23db between the rack and radio. Below is one of two different types of pads that I've built. This is a very simple one that works.

Yaesu FT-2000 Amateur Transceiver. Yaesu FT2000

    https://www.universal-radio.com/catalog/hamhf/0215.html
    The Yaesu FT-2000 follows in the tradition of venerable FT-1000 series, and incorporates an amazing number of advanced features from the FT-9000 series. The FT-2000 provides a full 100 watts of power output (AM: 25 Watts) on the 160-6 Meter Amateur bands, and the U.S. version includes a special memory bank containing the five 60-meter channels ...

Now you know Ft-2000 Headphone Audio Mixing Menu

Now that you know Ft-2000 Headphone Audio Mixing Menu, we suggest that you familiarize yourself with information on similar questions.