We have collected the most relevant information on Freeswitch Audiocodes. Open the URLs, which are collected below, and you will find all the info you are interested in.
AudioCodes Gateways - FreeSWITCH - Confluence
https://freeswitch.org/confluence/display/FREESWITCH/AudioCodes+Gateways
AudioCodes MediaPack MP118 8-FXO SIP. We had to add the IP of the FreeSWITCH sip server as the "Gateway Registration Name" and "Gateway Name" inside of the MediaPack. Default internal SIP profile without "suppress-cng" ="true", will cause terrible background noise heard on the internal SIP phones, when working with MP118 FXO. …
AudioCodes Phones - FreeSWITCH - Confluence
https://freeswitch.org/confluence/display/FREESWITCH/AudioCodes+Phones
AudioCodes are willing to make changes necessary for Freeswitch support (more details at the phone specific details). IP Phones The 310HD model is an entry level phone intended for the simple user and is ready for production use.
Configuring AudioCodes MP-114/118 - FreeSWITCH - Confluence
https://freeswitch.org/confluence/pages/viewpage.action?pageId=9634420
The AudioCodes box requires a continuous RTP stream otherwise it will time out after 10 seconds. Normally this isn't a problem, except when the call gets transferred to voice mail, where FreeSwitch normally doesn't send RTP while the message is being recorded. So if you want voice mails longer than 10 seconds you must add the following to vars.xml:
Configuring Audiocodes Behind NAT - FreeSWITCH - Confluence
https://freeswitch.org/confluence/display/FREESWITCH/Configuring+Audiocodes+Behind+NAT
Configuring Audiocodes Behind NAT. If there is a better way to accomplish this, please update this page! The scenario is this: FS with public IP <----- Internet -----> NAT <----- Audiocodes -----> PSTN. The audiocodes is a gateway to the PSTN but is behind a NAT and the public IP address of the NAT device is dynamic, which means it can change ...
Fax on AudioCodes Mediant - FreeSWITCH - Confluence
https://freeswitch.org/confluence/display/FREESWITCH/Fax+on+AudioCodes+Mediant
Fax on Audiocodes Mediant PRI gateway. Fax on this gateway is slightly tricky: Do not enable fax at all on this gateway, but when FreeSwitch will ask it to use T.38 it will do that happily. On the other hand, if you configure it to allow T.38 then Freeswitch won't ask it …
https://freeswitch-users.freeswitch.narkive.com/4sbIx8gn/tls-audiocodes
TLS between freeswitch and a softphone (phonerlite), but I have problem with Audiocodes during the TLS authentication. I've loaded the certification but it still doesn't work. Can I debug the tls in freeswitch? Please help me. Thank you in advance. Szasz Szabolcs
Setting up an Audiocodes MP-114/118 FXO with Asterisk and ...
https://www.voipsupply.com/blog/voip-insider/setting-up-an-audiocodes-mp-114118-fxo-with-asterisk-and-freeswitch/
Setting up an Audiocodes MP-114/118 FXO with Asterisk and FreeSwitch. Setting Up an AudioCodes MP1xx FXS With Asterisk. 3CX Versus Asterisk. SIP for magicjack. Bluetooth Headsets for Polycom VVX 500. 5 Reasons Why You Should Sell The Poly (Plantronics) Headsets – Webinar Recap
Interoperability - FreeSWITCH - Confluence
https://freeswitch.org/confluence/display/FREESWITCH/Interoperability
AudioCodes Gateways. Configuring Audiocodes Behind NAT; Configuring AudioCodes MP-114/118; Faxlib.jm; Fax on AudioCodes Mediant; Configuration OpenZAP - DigiumTDM400P Example. Openzap Configuration Examples; Dinstar GSM gateway FreeSwitch HowTo; Gateway Dinstar; Gateways Other; Goip HowTo; Media5; Obihai; Pluscom; Redfone; …
'Re: [Freeswitch-users] Audiocodes MP-118 VoIP …
https://marc.info/?l=freeswitch-users&m=133918073504884
[prev in list] [next in list] [prev in thread] [next in thread] List: freeswitch-users Subject: Re: [Freeswitch-users] Audiocodes MP-118 VoIP Gateway can't un-hold From: Yehavi Bourvine <yehavi.bourvine gmail ! com> Date: 2012-06-08 18:33:38 Message-ID: CAAtWKeFh+gMDqOAnV_3jeu6Bhtoxvg9RC4rd84BgNR9Lk09d+w mail ! gmail ! com …
sip_cid_type - FreeSWITCH - Confluence
https://freeswitch.org/confluence/display/FREESWITCH/sip_cid_type
Send P-Asserted-Identity:. you must set privacy flag, otherwise P-Preferred-Identity will be inserted instead of P-Asserted-Identity.
Now you know Freeswitch Audiocodes
Now that you know Freeswitch Audiocodes, we suggest that you familiarize yourself with information on similar questions.
