We have collected the most relevant information on Firewire Audio Playback. Open the URLs, which are collected below, and you will find all the info you are interested in.
M-Audio Firewire 410 - Sound on Sound
https://www.soundonsound.com/reviews/m-audio-firewire-410
The Firewire 410 includes two Firewire ports, allowing you to daisy-chain other Firewire devices if your computer only has one. Playback quality with a variety of music was very good, sounding almost exactly the same as my benchmark Echo …
MOTU Traveler-mk3 Firewire Audio Interface | Young ...
https://reverb.com/item/50521212-motu-traveler-mk3-firewire-audio-interface
The Traveler-mk3 provides eight channels of pristine 192 kHz analog recording and playback, combined with twenty channels of digital I/O in ADAT optical, AES/EBU and S/PDIF formats. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.The Trave...
Optimizing FireWire Performance - Universal Audio Support Home
https://help.uaudio.com/hc/en-us/articles/206452393-Optimizing-FireWire-Performance
Access the FireWire panel by clicking the menu button in the UAD Meter window and selecting “FireWire...” from the drop menu, or type Command+F (Mac) or Control+F (Win) as a shortcut. Change the UAD Bandwidth Allocation setting (shown below) by clicking the up or down arrows, or click+hold the value for a drop menu.
M-Audio FireWire Audiophile - Users Manual
https://c3.zzounds.com/media/FireWire_Audiophile_Manual-7b62e88908c906af2f619ae3e021b352.pdf
1. Turn your M-Audio FireWire device off, wait 30 seconds then power it on. 2. Put your computer into hibernation mode, wait 30 seconds then reactivate it. 3. Restart the computer (don’t turn it off) while the M-Audio FireWire device remains connected and powered on. The FireWire Audiophile is equipped with two analog inputs and four analog outputs on
StudioLive RM Series - Windows Audio (WDM) Routing and ...
https://support.presonus.com/hc/en-us/articles/210047573-StudioLive-RM-Series-Windows-Audio-WDM-Routing-and-Playback
Echo Firewire 5.7.6 pc - Windows Drivers | Echo …
http://files.echoaudio.com/drivers/windows/echo_firewire_5.7.6_pc_readme.pdf
Select the “Audio” tab; from here you can view the list of currently available audio devices. Under “Sound playback”, select the analog outputs for your AudioFire. Click the “Advanced” button – you will be presented with the Advanced Audio Properties dialog. Select the speaker configuration that best describes your setup.
Fixing FireWire (IEEE 1394) Problems - Studio 1 Productions
https://www.studio1productions.com/Articles/Firewire-1.htm
Using a IEEE 1394 Firewire connections with a Digital Audio Workstation (DAW) Depending on the version of the software you are using, you will need a Firewire port on the motherboard or a Firewire card plugging into the expansion slot.
RME Fireface 800 Firewire Audio Interface | Gear Bazaar ...
https://reverb.com/item/50066686-rme-fireface-800-firewire-audio-interface
Up to 56 channels record/playback, up to 192 kHz sample rate, and true FireWire 800 sum up to an unsurpassed high-end, high performance and high speed FireWire audio interface. Since the Fireface first shipped in July 2004, the unit became the reference for FireWire audio - …
Satellite FireWire Connection, Bandwidth, & Optimization ...
https://help.uaudio.com/hc/en-us/articles/206158146-Satellite-FireWire-Connection-Bandwidth-Optimization-Info
Access the FireWire panel by clicking the menu button in the UAD Meter window and selecting “FireWire...” from the drop menu, or type Command+F (Mac) or Control+F (Win) as a shortcut. Change the UAD Bandwidth Allocation setting (shown below) by clicking the up or down arrows, or click+hold the value for a drop menu.
Now you know Firewire Audio Playback
Now that you know Firewire Audio Playback, we suggest that you familiarize yourself with information on similar questions.
