We have collected the most relevant information on Eyebeam No Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
No Audio/Video with Eyebeam 1.5.19.4 Build 51814 - 3CX …
https://www.3cx.com/community/threads/no-audio-video-with-eyebeam-1-5-19-4-build-51814.9508/
Make sure that any eyebeam using Video codecs are not bound to media server. Also make sure that they are not recording. You must make the EYEBEAMS setup the calls through the PBX but must pass the audio directly between them. --------- Nicky Read & comment on 3CX Phone System news on the https://www.3cx.com/blog/ j_friedrich Joined Apr 2, 2009
HOW TO FIX EYEBEAM PROBLEMS, WHILE MAKING …
https://www.youtube.com/watch?v=vG_r5kT8acA
fix eye beam problems with simple trick and connect all calls with no interruption
One-way audio or not audio at all - Kolmisoft Wiki
http://wiki.kolmisoft.com/index.php/One-way_audio_or_not_audio_at_all
Check if your SIP/H.323 supports the codecs you use in MOR, for example eyeBeam does not support aLaw codec, so you will not have audio if you use aLaw as default codec for that device in MOR. rtp debug, watch to see whether or not audio is coming/leaving Make sure sip.conf is correctly configured if Asterisk is behind NAT
Administrator Guide: Eyebeam 1.5 Support - Escaux
https://www.escaux.com/docs/DRD_Eyebeam15Support_AdminGuide.html
Rightclick with the mouse over the Eyebeam softphone. At the bottom left, click on 'Advanced', followed by 'Audio Codecs'. You will arrive at the screen above. Now disable all codecs and leave only one codec left : G711 uLaw if there is enough bandwidth GSM …
eyeBeam Configuration Guide - Yeastar Support
https://support.yeastar.com/hc/en-us/articles/235618628-eyeBeam-Configuration-Guide
STEP 1. Launch Eyebeam softphone. STEP 2. If it is the first time that you open eyeBeam, you will see the figure shows as below. Go to STEP 4. STEP 3. If this is not the first time you open the eyeBeam, right click on the softphone, select “SIP Account Settings”. STEP 4. Click “Add...” to add a SIP account. STEP 5. Enter the account information.
How to troubleshoot one-way and no-way audio on VoIP …
http://info.teledynamics.com/blog/how-to-troubleshoot-one-way-and-no-way-audio-on-voip-calls
The vast majority of one-way or no-way audio problems are a result of the blockage of RTP ports for the voice stream. There may be many reasons why these ports would be blocked. Some of the most common are: (1) Network Address Translation (NAT)
Solving VoIP/UC One-way Audio Problems - YouTube
https://www.youtube.com/watch?v=do3Qhef8um4
Tim Titus, CTO of PathSolutions talks VoIP/UC troubleshooting with Brian Chee and solving one-way audio problems.For the full episode, visit https://twit.tv/...
vicidial.org • View topic - No audio when calling with our SIP
http://www.eflo.net/VICIDIALforum/viewtopic.php?t=29353
not having audio after a call connects is always firewall related. it can be the "externip" setting in sip.conf (which is a firwall setting!). it can also be that the audio signal is coming from a different ip than the control signal ... often turning off the firewall will resolve that issue unless you have a private network for your vicidial …
Microphone works but no sound from the headphones ...
https://answers.microsoft.com/en-us/windows/forum/all/microphone-works-but-no-sound-from-the-headphones/339794b5-3d60-4681-8616-bd607f443e84
put them - Right Click on - RUN AS ADMIN - Reboot Check the Version on Driver's tab in Device Manager as often sound drivers rollback and then finally install the current version. Reboot and check after each try, not unusual to have to run the driver 1-4 times or so. Just make sure the version you installed shows up in the driver's tab.
Now you know Eyebeam No Audio
Now that you know Eyebeam No Audio, we suggest that you familiarize yourself with information on similar questions.
