We have collected the most relevant information on Elecraft K3 Audio Settings. Open the URLs, which are collected below, and you will find all the info you are interested in.
Setting Elecraft transceivers for soundcard digital
http://www.w3fpr.com/download_files/Digital%20modes.pdf#:~:text=Now%20attend%20to%20the%20Elecraft%20gear.%20First%2C%20you,from%20the%20line%20to%20ground%20will%20usually%20suffice.
Elecraft K3 Settings - K5ZD
https://k5zd.com/elecraft-k3-settings/
Bob, N6TV, recommends the following K3 settings: First set CONFIG:TECH MD ON to un-hide some AGC settings. Set TECH MD OFF when finished, to eliminate useless options from appearing in the SubRx display choices (PLL1, AFV, dBV, etc.) AF GAIN LO — Cuts audio hiss. May not work with all headphones.
ELECRAFT K3 QUICK-START GUIDE - kkn.net
https://www.kkn.net/~tree/K3/K3%20quick%20start8.pdf
• Tap AFX {18} to enable binaural audio effects (AFXMD menu entry. pg. ??). • Tap DISP {8} and use VFO B to show time, supply voltage, etc. on VFO B (pg. ??). • The ALARM function (MAIN menu) can be used to remind you about a contest, net, or QSO schedule. The K3 will be turned on automatically if it is off at the time of alarm.
"Noisy" K3 - AGC settings (hopefully) simplified.
http://www.w3fpr.com/K3_AGC.htm
The K3 is quite a sensitive receiver, and has a wide dynamic range. That means it can hear weak signals (sensitivity) and at the same time, can tolerate quite large signals without overloading or producing significant distortion products (dynamic range). The typical K3 can "hear" signals as low as -140 dBm (specification is -136 dBm) and can
[Elecraft] K3 mic gain and bias settings
https://elecraft.mailman.qth.narkive.com/hvis3Nkq/k3-mic-gain-and-bias-settings
I previously posted a question to the group about mic gain settings in conjunction with the Elecraft MH2 hand mic. Prior to the slew of recent firmware updates, I had to set microphone bias to low, and keep the mic gain at 4 or 5. Anything higher, and ALC would start to reduce power. At those settings, speaking normally would give me 5-7 bars ...
[Elecraft] [K3] transmit equalizer settings
https://elecraft.mailman.qth.narkive.com/nx3pQb7i/k3-transmit-equalizer-settings
To: elecraft at mailman.qth.net. Subject: Re: [Elecraft] [K3] transmit equalizer settings. <<<If there is enough macro memory, it will work.>>>. Well there isn't, the limit on a Macro is 120 characters. The problem is, you can't just set an EQ band with a single command. You need to step UP or.
Now you know Elecraft K3 Audio Settings
Now that you know Elecraft K3 Audio Settings, we suggest that you familiarize yourself with information on similar questions.
