We have collected the most relevant information on Dynaudio X12 Stereophile. Open the URLs, which are collected below, and you will find all the info you are interested in.


Dynaudio Excite X12 loudspeaker | Stereophile.com

    https://www.stereophile.com/standloudspeakers/dynaudio_excite_x12_loudspeaker/index.html
    Dynaudio designs The X12 is the entry-level speaker of Dynaudio's Excite series, which includes three other models ranging up to $3600/pair. The rear-ported, two-way X12 sports a 5.7" cone made of a proprietary magnesium-silicate–loaded polymer (MSP), with a voice-coil and die-cast basket both made of aluminum.

Dynaudio Excite X12 loudspeaker Measurements | …

    https://www.stereophile.com/content/dynaudio-excite-x12-loudspeaker-measurements
    Fig.7 Dynaudio Excite X12, step response on tweeter axis at 50" (5ms time window, 30kHz bandwidth). Fig.8 Dynaudio Excite X12, cumulative spectral-decay plot on tweeter axis at 50" (0.15ms risetime). In his conclusion, Bob Reina mentioned that the Dynaudio Excite X12 has become his new benchmark for loudspeakers costing under $2000/pair.

Dynaudio Excite X12 loudspeaker Page 2 | Stereophile.com

    https://www.stereophile.com/content/dynaudio-excite-x12-loudspeaker-page-2
    Comparisons. I compared the Dynaudio Excite X12 ($1200) with the Amphion Helium 2 ($1200), the Monitor Audio RS6 Silver ($1200), and the Epos M16i ($1995). (All prices per pair.) The Amphion Helium 2 's midrange was very close to the Excite X12's, if a touch less silky. The highs were a little less detailed, delicate, and airy, but low-level ...

Dynaudio Excite X12 loudspeaker review | Stereophile.com

    https://www.stereophile.com/content/dynaudio-excite-x12-loudspeaker-review-1
    I just read Robert J. Reina's review from March, 2010 of the Dynaudio Excite X12 loudspeakers. Some of his statements are exactly describing how I feel about my own speakers, Dynaudio DM2/7 which are somewhat similar, but just a tad bit cheaper. Interesting reading:The layers of detail revealed by the X12's rich, glorious, silky midrange made me want to listen to …

Dynaudio Excite X12 loudspeaker Specifications - …

    https://www.stereophile.com/content/dynaudio-excite-x12-loudspeaker-specifications
    Dynaudio Excite X12 loudspeaker Specifications. Description: Two-way, reflex-loaded, stand-mounted loudspeaker. Drive-units: 1" (26mm) silk-dome tweeter, 5.7" (145mm) magnesium-silicate polymer-cone woofer. Crossover frequency: 2kHz. Frequency response: 50Hz–23kHz, ±3dB. Nominal impedance: 4 ohms.

Now you know Dynaudio X12 Stereophile

Now that you know Dynaudio X12 Stereophile, we suggest that you familiarize yourself with information on similar questions.