We have collected the most relevant information on Dynaudio Contour 3.3 Stereophile. Open the URLs, which are collected below, and you will find all the info you are interested in.
Dynaudio Contour 3.3 loudspeaker | Stereophile.com
https://www.stereophile.com/floorloudspeakers/262/index.html
To begin with, the Contour 3.3's heart is Dynaudio's 5.25" midrange driver, which is run from 350Hz to 2.8kHz. The unit's cone is made from magnesium silicate polymer (MSP), a proprietary material developed by Dynaudio to combine lightness and rigidity. It is supported by a die-cast basket and is driven by a 38mm pure-aluminum-wire voice-coil ...
Dynaudio Contour 3.3 loudspeaker Measurements - …
https://www.stereophile.com/content/dynaudio-contour-33-loudspeaker-measurements
The Dynaudio Contour 3.3 was measured with DRA Labs MLSSA system in the Stereophile listening room, mounted on an Italian Outline speaker turntable (footnote 1). I calculated its B-weighted sensitivity as a lowish 84.5dB/2.83V/m. However, its impedance (fig.1) only dropped below 4 ohms briefly in the upper bass.
Dynaudio Contour 3.3 loudspeaker Page 3 | …
https://www.stereophile.com/content/dynaudio-contour-33-loudspeaker-page-3
Dynaudio Contour 3.3 loudspeaker Page 3 The midrange sounded liquid and absolutely free from grain, while the bass was taut, well-controlled, and punchy. Some might find the Dynaudio's bass quite lean, and it was somewhat.
Dynaudio Contour 3.3 loudspeaker Page 2 | …
https://www.stereophile.com/content/dynaudio-contour-33-loudspeaker-page-2
Dynaudio Contour 3.3 loudspeaker Page 2. In addition to a pair of knurled brass binding posts, each Contour 3.3 is also outfitted with OCOS transformers. These allow OCOS speaker cable to be directly inserted, bypassing the need for external transformers. Thread-on spikes are provided for leveling the cabinets.
Dynaudio Contour 3.3 loudspeaker ... - Stereophile.com
https://www.stereophile.com/content/dynaudio-contour-33-loudspeaker-specifications
Dynaudio Contour 3.3 loudspeaker Specifications. Description: Three-way, floorstanding dynamic loudspeaker. Drive-units: 1.1" cloth-dome tweeter; one MSP-cone 5.25" midrange unit driven by a 38mm aluminum voice-coil and a dual-magnet system; two 8" MSP-cone woofers driven by a 4" aluminum-wire voice-coil in conjunction with dual magnets.
Dynaudio Contour 3.3 loudspeaker Measurements part 3 ...
https://www.stereophile.com/content/dynaudio-contour-33-loudspeaker-measurements-part-3
Dynaudio Contour 3.3 loudspeaker Measurements part 3. In the time domain, the Dynaudio's step response (fig.8) reveals that the speaker is not time-coherent, despite its use of first-order crossover filters. The tweeter is the sharp, positive-polarity up/down pulse just before the 4ms mark, followed by the negative-polarity, slower midrange ...
Dynaudio Contour 3.3 loudspeaker Measurements part 2 ...
https://www.stereophile.com/content/dynaudio-contour-33-loudspeaker-measurements-part-2
Dynaudio Contour 3.3 loudspeaker Measurements part 2. Fig.4 shows how the big Dynaudio's response changes as you move up or down from the tweeter axis. Sit so you can see the top of the cabinet (a very high chair) and a deep suckout appears in the upper crossover region. But sit below the tweeter, as WP did in his auditioning, and the mid ...
Buy floorstanding three-way speakers Contour 3.3 - …
https://www.dynaudio.com/discontinued-models/contour/contour-33/
3.3. The Contour 3.3 is the result of years of painstaking Danish research into all aspects of loudspeaker design, and as such it bears all the hallmarks of Dynaudio's advanced loudspeaker technology. This three-way, floor-standing speaker designed for larger rooms where power is vital, features dual bass drivers incorporating 100 mm (4 inch ...
Now you know Dynaudio Contour 3.3 Stereophile
Now that you know Dynaudio Contour 3.3 Stereophile, we suggest that you familiarize yourself with information on similar questions.
