We have collected the most relevant information on Dscp Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
DSCP for Audio Portion of Video Calls does not apply while ...
https://community.cisco.com/t5/ip-telephony-and-phones/dscp-for-audio-portion-of-video-calls-does-not-apply-while-using/td-p/3080091
This is apparently the expected behavior according to the following CUCM setting : "DSCP for Audio Portion of Video Calls". Here, according to this setting, the voice during a video call is tagged differently (AF41), explaining the bad quality.
Using QoS DSCP Marking – Zoom Support
https://support.zoom.us/hc/en-us/articles/207368756-Using-QoS-DSCP-Marking
The default Zoom DSCP marking values are 56 for audio, 40 for video, and 40 for screen sharing. You can update audio and video values to allow a network administrator to adjust the priority for Zoom traffic on their network.
DSCP and Precedence Values - Cisco
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_0/qos/configuration/guide/nexus1000v_qos/qos_6dscp_val.pdf
DSCP and Precedence Values This section provides the DSCP and precedence values used in QoS class maps and policy maps. Commonly Used DSCP Values Unless noted as a restriction, you can mark both incoming and outgoing packets. Table 6-1 lists the commonly used DSCP values described in RFC 2475. Table 6-1 Commonly Used DSCP Values DSCP Value Decimal
Implement Quality of Service in Microsoft Teams ...
https://docs.microsoft.com/en-us/microsoftteams/qos-in-teams
The DSCP value tells a correspondingly configured network what priority to give a packet or stream, whether the DSCP mark is assigned by clients or the network itself based on ACL settings. Each media workload gets its own unique DSCP value (other services might allow workloads to share a DSCP marking, Teams doesn't) and a defined and separate ...
Configuring port ranges and a Quality of Service policy ...
https://docs.microsoft.com/en-us/skypeforbusiness/manage/network-management/qos/configuring-port-ranges-for-your-skype-clients
Set the DSCP value to 34 instead of 46. (As noted previously, you do not have to use the DSCP value 34; you simply must assign a different DSCP value than the one used for audio.) Use the previously configured port range for video traffic.
Configuring port ranges and a Quality of Service policy ...
https://docs.microsoft.com/en-us/SkypeForBusiness/manage/network-management/qos/configuring-port-ranges-for-your-conferencing-application-and-mediation-servers
If you are just now implementing Quality of Service, then it is recommended that you use DSCP 46 for audio, simply because that value is commonly used to mark audio packets.
How does Dante use DSCP / Diffserv priority values when ...
https://www.audinate.com/learning/faqs/how-does-dante-use-dscp-diffserv-priority-values-when-configuring-qos
DSCP for Dante Software Dante software does not apply DSCP to audio, control or PTP packets. This is because computers sometimes transmit packets in bursts, and a burst of packets tagged as high priority could block out other network traffic, causing issues for other applications.
Implement Quality of Service (QoS) in Microsoft Teams ...
https://docs.microsoft.com/en-us/microsoftteams/qos-in-teams-clients
In the Group Policy Management Editor, expand Computer Configuration, expand Windows Settings, right-click Policy-based QoS, and then click Create new policy. In the Policy-based QoS dialog box, on the opening page, type a name for the new policy in the Name box. Select Specify DSCP Value and set the value to 46.
Now you know Dscp Audio
Now that you know Dscp Audio, we suggest that you familiarize yourself with information on similar questions.
