We have collected the most relevant information on Differential Line Driver Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.


Audio Line Drivers and Receivers - Analog Devices

    https://www.analog.com/en/products/audio-video/audio-amplifiers/audio-line-drivers-and-receivers.html
    Audio Line Drivers and Receivers. Analog Devices audio line driver and receiver solutions feature differential-output buffer amplifiers and differential input buffer amplifiers to support a wide range of applications. By using low noise thermally matched thin film resistors and high slew rate amplifiers, these parts maintain the sonic quality of audio systems by eliminating power line …

Balanced Line Driver ICs - THAT Corporation Audio Technology

    http://www.thatcorp.com/1600-series_Balanced_Line_Driver_ICs.shtml
    The THAT 1606 and 1646 are a new generation of monolithic differential line drivers offering improved performance over conventional cross-coupled designs. Based on a high-performance, fully differential op amp and laser-trimmed thin-film resistors, both families exhibit low noise and distortion, high slew rate, and wide output swing.

DRV13x Audio-Balanced Line Drivers - TI

    https://www.ti.com/lit/gpn/DRV134
    DRV13x Audio-Balanced Line Drivers 1 Features 3 Description The DRV134 and DRV135 are differential output 1• Balanced Output amplifiers that convert asingle-ended input to • Low Distortion: 0.0005% at f = 1 kHz balanced output pair. These balanced audio drivers • Wide Output Swing: 17Vrms into 600 Ω consist of high performance op amps with on-chip

MAX97220 Differential Input DirectDrive Line Drivers ...

    https://www.maximintegrated.com/en/products/analog/audio/MAX97220.html
    The MAX97220 is a differential input DirectDrive® line driver/headphone amplifier. This device is capable of driving line level loads with 3V RMS into 1kΩ with a 5V supply and 2V RMS into 600Ω loads from a 3.3V supply. A headphone load is capable of being driven with 125mW into 32Ω with a 5V supply. The IC is offered with an internally fixed 6dB gain or an externally set gain through …

Differential Line Driver - Impedance Questions | diyAudio

    https://www.diyaudio.com/community/threads/differential-line-driver-impedance-questions.221685/
    I need a simple differential line driver to take a single ended, line level signal to a balanced signal. It is only passing audio signals, but I would like it to be flat up to about 100 kHz. After reading the specs on the OPA1632, I dug into the …

Balanced Audio Line Driver (Unbalance to Balance Audio ...

    https://www.twovolt.com/2019/01/19/audio-balanced-line-driver-unbalance-to-balance-audio-signal-converter-using-drv135-ssm2142/
    19/01/2019 RAJ SHARMA. The Mini board converts unbalance Audio signal into balance audio signal, the project is based on SSM2142 or DRV135 IC which are differential output amplifier that converts a single ended audio signal input to a balanced output pair. This balanced audio driver consists of high-performance op-amps with on-chip precision resistors.

Now you know Differential Line Driver Audio

Now that you know Differential Line Driver Audio, we suggest that you familiarize yourself with information on similar questions.