We have collected the most relevant information on Denon 689 Hdmi Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
Amazon.com: Denon AVR-689 560-Watt 7.1 Channel …
https://www.amazon.com/Denon-560-Watt-Receiver-Discontinued-Manufacturer/dp/B001BNYX58
Denon AVR-689: 7.1 CH/5.1+2 CH Independent Zone Home Theater Receiver The Denon AVR-689 delivers power and performance and is ready to take on HD …
Denon AVR-689 and HDMI - Audioholics Home Theater Forums
https://forums.audioholics.com/forums/threads/denon-avr-689-and-hdmi.61551/
I have the option to take the AVR-689 back to the shop and exchange it for either a Denon AVR-590 or an ONKYO TX-SR606 for an additional $200. The 590 is only 5.1 and has no multi zone though (but I'm not particularly concerned), whereas the Onkyo does, but they both support the new HD codecs + audio over HDMI (+video upscaling) unlike the 689.
No HDMI audio with an older Denon AVR
https://support.denon.com/app/answers/detail/a_id/231/~/no-hdmi-audio-with-an-older-denon-avr
Older Denon AVRs such as the 1508, 1708, 588, 688, 589, 689, 1609, and 1709 were simply HDMI switchers and did not include an HDMI repeater to process the HDMI input audio.
Denon AVR-689 7.1 A/V Receiver - HomeTheaterHifi.com
https://hometheaterhifi.com/reviews/receiver-processor/receivers/a-secrets-receiver-review83/
At 8 ohms, the AVR-689 delivered 85 watts RMS into 8 ohms (two channels) before a rapid rise to clipping (1% THD+N) at 110 volts. At 4 ohms, the output was 110 watts, then a rise to clipping at 140 watts. Notice that at 4 ohms, distortion begins to rise rapidly at 20 watts, whereas at 8 ohms, it begins the rapid rise at 85 watts.
What's the purpose of HDMI input on the Denon AVR-689 if ...
https://www.hometheaterforum.com/community/threads/whats-the-purpose-of-hdmi-input-on-the-denon-avr-689-if-you-have-to-run-separate-digital-audio-cabl.291447/
I have the AVR-689 audio surround receiver along with a PS3 and a HiDef Digital cable box from Comcast. Both the PS3 and the cable box have HDMI outputs. I run the HDMI cables to the HDMI input on the receiver and no sound comes out. I read in the receiver manual that 'The audio signal input...
Help with Denon AVR689 - AVS Forum
https://www.avsforum.com/threads/help-with-denon-avr689.1066858/
The 689 will not convert analog to HDMI output, however, so you will need to run two cables from the 689 to the TV, one component for analog sources, and one HDMI for digital sources. In this setup, you will need these cables: 1. PS3 connected to 689 with HDMI for video + digital audio cable for audio 2.
Now you know Denon 689 Hdmi Audio
Now that you know Denon 689 Hdmi Audio, we suggest that you familiarize yourself with information on similar questions.
