We have collected the most relevant information on Darkice Pulseaudio. Open the URLs, which are collected below, and you will find all the info you are interested in.
Audio streaming from Ubuntu / darkice / pulseaudio to ...
https://sergionieton.blogspot.com/2017/09/audio-streaming-from-ubuntu-darkice.html
E. Install pulse Audio Volumen Control apt-get install pavucontrol or sudo apt-get install pavucontrol F. Run darkice from any terminal darkice or sudo darkice You should see a screen like this Review any error on the screen, error will avoid darkice from running.
[darkice] Problem getting darkice to work with pulseaudio ...
https://www.freelists.org/post/darkice/Problem-getting-darkice-to-work-with-pulseaudio
This is my darkice.cfg file (I hid some sensitive data): [general] duration = 0 bufferSecs = 10 [input] device = pulseaudio paSourceName = alsa_output.pci-0000_00_1b.0.analog-stereo.monitor sampleRate = 44100 bitsPerSample = 16 channel = 2 [icecast2-0] bitrateMode = cbr format = mp3 bitrate = 64 quality = 0.8 server = xxx port = xxx …
Mumble, Icecast, Darkice, Pulseaudio playing nicely in ...
https://www.skyehaven.net/blog/2011/03/14/mumble-icecast/
Darkice will be using stream.monitor as it’s audio input. Once you have created the null sink, set the audio output on STREAMER’s Mumble client to the pulseaudio null sink (Settings->Audio Output, System = PulseAudio, Device = Null Output).
DarkIce live audio streamer
What Is DarkIce? DarkIce is a live audio streamer. It records audio from an audio interface (e.g. sound card), encodes it and sends it to a streaming server. DarkIce can record from: OSS audio devices ALSA audio devices Solaris audio interface Jack sources uLaw audio input through a serial interface CoreAudio (branch darkice-macosx)
DarkIce
http://darkice.org/ChangeLog
thanks to Sergiy o Added pulseaudio support closes ticket #25 thanks to Filipe Roque and and Johann Fot o Added rtprio parameter and revisited realtime priority closes ticket #21 thanks to Adrian Knoth o Fixed a call to a deprecated jack call closes ticket #22 thanks to Adrian Knoth again. 09-05-2010 Darkice 1.0 released o fixed a bug in ...
Stream sound card output to icecast2 via darkice - Ask …
https://askubuntu.com/questions/225271/stream-sound-card-output-to-icecast2-via-darkice
3. This answer is not useful. Show activity on this post. Set device = /dev/dsp Then start darkice using: padsp darkice. padsp starts the specified program and redirects its access to OSS com‐ patible audio devices (/dev/dsp and auxiliary devices) to a PulseAudio sound server. Share. Improve this answer.
Darkice stream not displayed in pavucontrol, no audible ...
https://bbs.archlinux.org/viewtopic.php?id=250112
darkice -> alsa-lib -> alsa jack plugin -> jack -> pulseaudio -> linux -> audio card That's 6 interactions and potential points of failure, and I know of at least one quite recent jack ALSA breakage and a major restructuring in the way jack2 was packaged (where I admittedly do not know enough of jack to know whether this was just of cosmetic or ...
Permissions for Running DarkIce / System Administration ...
https://bbs.archlinux.org/viewtopic.php?id=175851
Here is the input section from darkice.cfg in case it matters: [input] device = pulse # OSS DSP soundcard device for the audio input sampleRate = 22050 # sample rate in Hz. try 11025, 22050 or 44100 bitsPerSample = 16 # bits per sample. try 16 channel = 1 # channels. 1 = mono, 2 = stereo. I figure this is more likely a problem with how cron ...
How To Use pulseaudio-dlna To Stream Audio To Chromecast ...
https://www.linuxuprising.com/2020/10/how-to-use-pulseaudio-dlna-to-stream.html
pulseaudio-dlna is a streaming server which allows streaming audio from your Linux computer to a Chromecast or DLNA / UPNP device in the same network, via PulseAudio.
audio - How to get PulseAudio running? - Raspberry Pi ...
https://raspberrypi.stackexchange.com/questions/639/how-to-get-pulseaudio-running
Install pulseaudio and make sure user (e.g. eric) is part of the audio group: sudo apt-get install pulseaudio pulseaudio-utils sudo adduser eric audio Change /etc/asound.conf look like the following. This sets up pulseaudio to be used as an alsa device by default so applications use it without any additional configuration.
Now you know Darkice Pulseaudio
Now that you know Darkice Pulseaudio, we suggest that you familiarize yourself with information on similar questions.
