We have collected the most relevant information on Cx88 Tvaudio. Open the URLs, which are collected below, and you will find all the info you are interested in.
						
						
						
						
						
						PCI TV audio - MythTV Official Wiki
						https://www.mythtv.org/wiki/PCI_TV_audio
						Download cx88_eeprom - run it for good instructions on how to proceed - summary: modprobe i2c-dev; Discover which device is the cx88; cx88_eeprom device - follow instructions to toggle audio on; Shutdown and power cycle (yes, actually turn the machine off) Ensure cx88-alsa is loaded - make sure new /dev/dspX device is present
						 
						
						
						
						cx88 devices (cx2388x) - LinuxTVWiki
						https://www.linuxtv.org/wiki/index.php/Cx88_devices_(cx2388x)
						cx88-dvb Sound When tuning digital channels, all you need is a functioning sound card with no further configuration. When tuning analog channels, there are two ways you can capture the sound. You can capture it through the internal audio cable that connects the tuner board to the sound card or through DMA audio using the cx88-alsa driver.
						 
						
						
						
						12. The cx88 driver — The Linux Kernel documentation
						https://www.kernel.org/doc/html/v4.12/media/v4l-drivers/cx88.html
						The cx88 driver. This is a v4l2 device driver for the cx2388x chip. 12.1. Current status. Works. Overlay isn’t supported. Works. The TV standard detection is made by the driver, as the hardware has bugs to auto-detect. audio data dma (i.e. recording without loopback cable to the sound card) is supported via cx88-alsa.
						 
						
						
						
						cx88 - Hauppauge Chip - LinuxQuestions.org
						https://www.linuxquestions.org/questions/linux-hardware-18/cx88-hauppauge-chip-108647/
						Nov 8 13:30:45 linux kernel: cx88[0]/0: cx88: tvaudio thread started Nov 8 13:30:45 linux kernel: cx88[0]/0: AUD_STATUS: 0xffe2 [mono/no pilot] ctl=BTSC_AUTO_STEREO Nov 8 13:30:46 linux kernel: cx88[0]/0: AUD_STATUS: 0xf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO Nov 8 13:30:47 linux kernel: cx88[0]/0: AUD_STATUS: 0x232 [mono/no pilot] ctl=BTSC_AUTO ...
						 
						
						
						
						Gentoo Forums :: View topic - TV, no sound on cx88 chipset ...
						https://forums.gentoo.org/viewtopic.php?t=130889
						
						 
						
						
						
						cx88 - LinuxTVWiki
						https://www.linuxtv.org/wiki/index.php/Cx88
						cx88. From LinuxTVWiki. Jump to navigation Jump to search. cx88 is a kernel driver module meant to support devices that use a CX2388x A/V decoder chip, which, taken collectively, are known as cx88 devices (cx2388x) .
						 
						
						
							
						Now you know Cx88 Tvaudio
						Now that you know Cx88 Tvaudio, we suggest that you familiarize yourself with information on similar questions.