We have collected the most relevant information on Configure Audiocodes Lync. Open the URLs, which are collected below, and you will find all the info you are interested in.
Configuration Note - AudioCodes
https://www.audiocodes.com/media/8026/ltrt-34110-audiocodes-elin-gateway-for-ms-lync-e9-1-1-configuration-note.pdf
Configuration Note. The VoIP user dials 9-1-1. The call is eventually sent to the PSTN through a PSTN Gateway. The PSTN identifies the call is an emergency call and sends it to an E9-1-1 Selective Router in the Emergency Services provider's network. The E9-1-1 Selective Router determines the ...
Configuration Guide - AudioCodes
https://www.audiocodes.com/media/10206/ltrt-33420-connecting-paetec-sip-trunking-service-to-microsoft-lync-via-mediant-800-1000-and-3000-e-sbc-gateways-configuration-note.pdf
Published by the AudioCodes Interoperability Group Configuration Guide Version 6.2 October 2011 Document # LTRT‐33420 Mediant™ 800, 1000 and 3000 E‐SBC Media Gateways Connecting PAETEC SIP Trunking Service to Microsoft® Lync Server 2010
Configuration Note - AudioCodes
https://www.audiocodes.com/media/9660/ltrt-12412-mediant-e-sbc-for-twilio-sip-trunk-with-microsoft-lync-2013-configuration-note.pdf
Configuration Note 3. Configuring Lync Server 2013 Version 7.0 13 AudioCodes Mediant E -SBC 3 Configuring Lync Server 2013 This chapter describes how to configure Lync Server 201Microsoft 3 to operate with AudioCodes E-SBC. Note: Dial plans, voice policies, and PSTN usages are also necessary for Enterprise
Microsoft Lync and Skype Manager SIP Trunk - …
https://www.audiocodes.com/media/10300/ltrt-41301-audiocodes-mediant-1000-msbg-with-microsoft-lync-and-skype-sip-trunk-configuration-note.pdf
This configuration note is intended for Installation Engineers or AudioCodes and Skype Partners who are installing and configuring the Skype SIP Trunking and Microsoft Lync Communication platform to place VoIP calls using the AudioCodes gateway. The AudioCodes Mediant 1000 MSBG device was used to implement this solution.
AudioCodes FXO to Lync Configuration - My UC Thoughts
https://www.myucthoughts.com/2012/06/audiocodes-fxo-to-lync-configuration.html
AudioCodes FXO to Lync Configuration. Was setting up an FXO analog port for an in-dial today, with an AudioCodes Mediant 800, has some issues with getting the FXO to make and receive calls. After a few email with support at VExpress finally got it sorted. The basic configuration of the Mediant 800 is much the same as all their other gateways ...
Connecting Microsoft Lync 2013 to a SIP Trunk - …
https://www.audiocodes.com/media/8045/ltrt-54006-lync-2013-mediant-e-sbc-sip-trunking-configuration-note-ver-66.pdf
The Configuration Note is intended for or AudioCodes and Partners who are engineers responsible for installing and configuring SIP Trunking and Microsoft's Lync communication platform for enabling VoIP calls using AudioCodes' E-SBC.
Lync 2013 PSTN Gateway Configuration with Audiocodes ...
https://social.technet.microsoft.com/Forums/lync/en-US/4bb17569-649e-415b-bd47-df88a12ddeb9/lync-2013-pstn-gateway-configuration-with-audiocodes-mediant-800-connected-to-toshiba-ipedge-for
First, you have to findout the settings for the trunk configuration between audiocodes and you IP-PBX. In a side by side configuration between your IP-PBX and Lync you will have different extensions on the IP-PBX and Lync but you can use simult. ringing or call forward from your main extension to use both endpoints.
Now you know Configure Audiocodes Lync
Now that you know Configure Audiocodes Lync, we suggest that you familiarize yourself with information on similar questions.
