We have collected the most relevant information on Configure Audiocodes For Lync. Open the URLs, which are collected below, and you will find all the info you are interested in.
Configuration Note - AudioCodes
https://www.audiocodes.com/media/8026/ltrt-34110-audiocodes-elin-gateway-for-ms-lync-e9-1-1-configuration-note.pdf
(hereafter referred to as Lync Server 2010), and the deployed AudioCodes ELIN Gateway which provides the ISDN (or CAMA) connectivity to the PSTN-based E9-1-1 emergency providers. This document also describes the configuration of AudioCodes ELIN Gateway for interoperating between the Lync Server environment and the E9-12010 -1 emergency provider.
Configuration Guide - AudioCodes
https://www.audiocodes.com/media/10206/ltrt-33420-connecting-paetec-sip-trunking-service-to-microsoft-lync-via-mediant-800-1000-and-3000-e-sbc-gateways-configuration-note.pdf
This Configuration Guide describes a sample configuration scenario for a network that uses the AudioCodes Mediant 800 MSBG E-SBC, Mediant 1000 MSBG E–SBC or the Mediant 3000 E-SBC Media Gateway to facilitate a connection between Microsoft Lync 2010 and PATEC’s SIP Trunking Service, for superior voice quality services.
Configuration Note - AudioCodes
https://www.audiocodes.com/media/9660/ltrt-12412-mediant-e-sbc-for-twilio-sip-trunk-with-microsoft-lync-2013-configuration-note.pdf
Configuration Note 3. Configuring Lync Server 2013 Version 7.0 15 AudioCodes Mediant E -SBC The Topology Builder screen with the downloaded Topology is displayed: Figure 3-4: Downloaded Topology 4. Under the Shared Components node, right-click the PSTN gateways node, and then from the shortcut menu, choose New IP/PSTN Gateway, as shown below:
AudioCodes FXO to Lync Configuration - My UC Thoughts
https://www.myucthoughts.com/2012/06/audiocodes-fxo-to-lync-configuration.html
AudioCodes FXO to Lync Configuration. Was setting up an FXO analog port for an in-dial today, with an AudioCodes Mediant 800, has some issues with getting the FXO to make and receive calls. After a few email with support at VExpress finally got it sorted. The basic configuration of the Mediant 800 is much the same as all their other gateways ...
Connecting Microsoft Lync 2013 to a SIP Trunk - …
https://www.audiocodes.com/media/8045/ltrt-54006-lync-2013-mediant-e-sbc-sip-trunking-configuration-note-ver-66.pdf
The Configuration Note is intended for or AudioCodes and Partners who are engineers responsible for installing and configuring SIP Trunking and Microsoft's Lync communication platform for enabling VoIP calls using AudioCodes' E-SBC.
Microsoft Lync and Skype Manager SIP Trunk - …
https://www.audiocodes.com/media/10300/ltrt-41301-audiocodes-mediant-1000-msbg-with-microsoft-lync-and-skype-sip-trunk-configuration-note.pdf
This configuration note is intended for Installation Engineers or AudioCodes and Skype Partners who are installing and configuring the Skype SIP Trunking and Microsoft Lync Communication platform to place VoIP calls using the AudioCodes gateway. The AudioCodes Mediant 1000 MSBG device was used to implement this solution.
Lync 2013 PSTN Gateway Configuration with Audiocodes ...
https://social.technet.microsoft.com/Forums/lync/en-US/4bb17569-649e-415b-bd47-df88a12ddeb9/lync-2013-pstn-gateway-configuration-with-audiocodes-mediant-800-connected-to-toshiba-ipedge-for
First, you have to findout the settings for the trunk configuration between audiocodes and you IP-PBX. In a side by side configuration between your IP-PBX and Lync you will have different extensions on the IP-PBX and Lync but you can use simult. ringing or call forward from your main extension to use both endpoints.
Lync 2013 PSTN Gateway Configuration with Audiocodes ...
https://social.technet.microsoft.com/Forums/en-US/494fd361-d293-4832-8e5e-774f901266db/lync-2013-pstn-gateway-configuration-with-audiocodes-mediant-1000-connected-to-nortel-cs1000-v55
I am trying to get the gateway between our Lync 2013 and Nortel PBX to talk to each other. Current setup is CS1000<->Mediant1000<->Lync 2013 and Exchange 2010 UM. Routes are configured in NRS on the CS1000 to pass UM extensions and Lync 82xxx extensions to the Mediant Routes are configured in ... · From the log, the call from Nortel use 5060 port. You ...
[Microsoft Lync Server 2013] AudioCodes Mediant SBC ...
https://microsofttouch.fr/default/b/christophe/posts/microsoft-lync-server-2013-audiocodes-mediant-sbc-configuration-wizard
[Microsoft Lync Server 2013] AudioCodes Mediant SBC Configuration Wizard Le Cloud de Christophe BOUCETTA Voici le blog sur les communications unifiées (MVP Lync/Skype for Business, CCNP Voice, CCNP Collaboration)
MP-114 pre-configured BOARD.INI for Lync 2010
http://www.lynclog.com/2011/04/mp-114-pre-configured-boardini-for-lync.html
Go to Configuration -> Protocol Configuration -> Proxies, Registration, IP Groups -> Proxy Sets Table and replace the current value with your Lync co-located or Standalone Mediation FQDN:port number. Go to Configuration->Network Settings->Application Settings and enter the IP address of your DNS internal DNS Server.
Now you know Configure Audiocodes For Lync
Now that you know Configure Audiocodes For Lync, we suggest that you familiarize yourself with information on similar questions.
