We have collected the most relevant information on Cisco One Way Audio Over Vpn. Open the URLs, which are collected below, and you will find all the info you are interested in.
Calls - One-way Audio in Cisco Jabber
https://help.webex.com/article/WBX9000017533/One-way-Audio-in-Cisco-Jabber#:~:text=One-way%20Audio%20in%20Cisco%20Jabber%20When%20you%20make,that%20VPN%20client%20using%20the%20relevant%20third-party%20documentation.
Solved: One-Way voice in a call over VPN - Cisco Community
https://community.cisco.com/t5/ip-telephony-and-phones/one-way-voice-in-a-call-over-vpn/td-p/2232262
One-Way voice in a call over VPN. We have a problem with the calls when they come from a user connected through VPN. The topology is the next: VPN User->ASA->ROUTER->User in office. Both users are in inside interface and the command " same-security-traffic permit intra-interface" is configured so the traffic is allowed.
Calls - One-way Audio in Cisco Jabber
https://help.webex.com/article/WBX9000017533/One-way-Audio-in-Cisco-Jabber
One-way Audio in Cisco Jabber When you make a Cisco Jabber call using a VPN over a Wi-Fi network, and the call audio is only one-way, then check if you’re using the Cisco AnyConnect VPN client. If you're using a different VPN client, then make sure that you install and configure that VPN client using the relevant third-party documentation.
No audio on voice calls over VPN softphone to/from ... - Cisco
https://community.cisco.com/t5/ip-telephony-and-phones/no-audio-on-voice-calls-over-vpn-softphone-to-from-remote-site/td-p/2224430
No audio on voice calls over VPN softphone to/from remote site IP Phone. I'm at a loss here, so any assistance will be very much appreciated. I'll do my best to describe the scenario: Softphone -> SSL VPN -> ASA 5510 -> Cisco 4507 CORE -> Cisco 2821 MPLS Router -> MPLS Network -> Cisco 2811 H.323 Gateway -> Cisco 2960 POE Switches -> Cisco 7942 ...
jabber client: no audio between VPN users through ... - Cisco
https://community.cisco.com/t5/collaboration-applications/jabber-client-no-audio-between-vpn-users-through-vpn/td-p/3402118
jabber client: no audio between VPN users through vpn concentrator. i configured jabber client and calls can be establish and can make calls without any issue. but when the users are connected through vpn, calls are established but they are unable to hear any audio on both sides. ie user in vpn to user in vpn not able to listen voice each other ...
One-way Audio over Site-to-Site VPN at Remote Sites ...
https://community.freepbx.org/t/one-way-audio-over-site-to-site-vpn-at-remote-sites/51675
One way audio is usually NAT config. If your PBX has a Private LAN IP, then you want to set Settings, Asterisk SIP settings with NAT=yes, the external IP specified correctly, and then enter ALL the local subnets that are not natted. …
GS Wave over VPN - One-Way Audio - Wave Lite Softphone app
http://forums5.grandstream.com/t/gs-wave-over-vpn-one-way-audio/32662
Set the Outbound Proxy in GS Wave to the external ip address and the port the PBX is located on. Looks like XXX.XXX.XXX.XXX:XXXX On the PBX, go to PBX > SIP Settings > NAT and create a local network address. Enter the ip address of the PBX. Save then reboot. Open ports for Signaling on your external router and forward to PBX.
How to resolve one-way or no-way audio on VoIP calls
http://info.teledynamics.com/blog/how-to-resolve-one-way-or-no-way-audio-on-voip-calls
One way to bypass the issues of NAT is to create a Virtual Private Network (VPN) on the enterprise network that places all the physical sites on the same internal subnet, or a series of linked internal subnets. VPN tunnels assist in passing packets from site to site, thus reducing the involvement of NAT on the edge router.
Now you know Cisco One Way Audio Over Vpn
Now that you know Cisco One Way Audio Over Vpn, we suggest that you familiarize yourself with information on similar questions.
