We have collected the most relevant information on Cisco Ip Communicator One Way Audio Vpn. Open the URLs, which are collected below, and you will find all the info you are interested in.
VPN users using IP Communicator - One-way audio - Cisco ...
https://community.cisco.com/t5/vpn/vpn-users-using-ip-communicator-one-way-audio/td-p/2333229
No config changes that I am aware of, it just suddenly stopped working. I am able to ping VPN user and VPN user is able to ping back... from voice vlan as well. VPN users are able to hear other VPN users using IP Communicator. When I call from LAN, VPN user can hear me but I cannot hear them. Any ...
Solved: One-Way voice in a call over VPN - Cisco Community
https://community.cisco.com/t5/ip-telephony-and-phones/one-way-voice-in-a-call-over-vpn/td-p/2232262
One-Way voice in a call over VPN. We have a problem with the calls when they come from a user connected through VPN. The topology is the next: VPN User->ASA->ROUTER->User in office. Both users are in inside interface and the command " same-security-traffic permit intra-interface" is configured so the traffic is allowed.
Solved: One Way Audio VPN Connection CIPC - Cisco
https://community.cisco.com/t5/ip-telephony-and-phones/one-way-audio-vpn-connection-cipc/td-p/4065530
I've added ACL's to allow traffic, NAT exempt VPN subnet to internal LAN. The weird thing is calling from softphone CIPC to DX650 one way audio, CIPC to 7945G one way audio, CIPC to 7925G works. From CIPC side I get no codec negotiated, sender packets increment, but everything else stays at 0.
Solved: one way audio when using cisco ip …
https://www.experts-exchange.com/questions/26192439/one-way-audio-when-using-cisco-ip-communicator-over-vpn.html
the problem i have is that when the cisco ip communicator registers with the cme/cue router via a remote access vpn i only have one way audio from the cisco 7940 phone to the CIPC but not the other way around, however if i plug the pc into the 3550 switch and register the CIPC with the cme/cue router from there i have two way audio.
One way audio - FG IPsec VPN <-> Cisco IP Comm (s ...
https://community.fortinet.com/t5/Fortinet-Forum/One-way-audio-FG-IPsec-VPN-lt-gt-Cisco-IP-Comm-softphone/m-p/9619?m=107369
I’d configured a IPSec VPN in a FG 90D that runs perfectly with forticlient to access Windows shares and local servers. When I start Cisco IP Communicator, it registers with call manager, receive dial tone (I can hear it too), make & receive calls, but after the call is completed, the Cisco IP Comm extension doesn’t receive any audio!
Cisco IP Communicator Administration Guide (1.1 ...
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cipc/1_1/english/administration/guide/admin/CADcfg.html
If the PC on which Cisco IP Communicator is running uses an unsupported software VPN client, audio IP address auto-detection will not work. The resulting symptom is one-way audio. In this case, you need to complete the following tasks: • First, run the Cisco IP Communicator Administration Tool and select the option to enable the HTTP access.
Troubleshooting One Way Voice Issues - Cisco
https://www.cisco.com/c/en/us/support/docs/voice/voice-quality/5219-fix-1way-voice.html
When a toll-bypass call is established between two Cisco gateways, only one of the parties receives audio (one-way communication). When a phone call is established from an IP station that is placed behind a VPN 3002 Hardware Client, only one of the parties receives audio (one-way communication).
Release Notes for Cisco IP Communicator 8.6.4 - Cisco
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cipc/8_6_4/CIPC_BK_C6B0FEBA_00_cisco-ip-communicator-864-release.html
Using video with Cisco IP Communicator over a corporate wireless LAN can result in poor audio and video quality. Video calls can be placed or received on a remote wireless LAN connection with a minimum broadband link of 384kbps/384kbps. For best results, we recommend that you use video over a wired Ethernet connection whenever possible.
Administration Guide for Cisco IP Communicator Release 2.1
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cipc/2_1/english/administration/guide/admin2_1/cag21cfg.html
Cisco IP Communicator right-click > Preferences > Audio tab > Optimize for Low Bandwidth. Specify the TFTP address at first startup. Remote users are probably not going to receive their TFTP address from DHCP. However, Cisco IP Communicator caches the last TFTP address that it received and tries to use it the next time it starts up.
Release Notes for Cisco IP Communicator Release 7.0 - Cisco
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cipc/7_0/english/release/notes/CIPC70_RN.html
Note Using video with Cisco IP Communicator over a corporate wireless LAN can result in poor audio and video quality. Video calls can be placed or received on a remote wireless LAN connection with a minimum broadband link of 384kbps/384kbps. For best results, we recommend that you use video over a wired Ethernet connection whenever possible.
Now you know Cisco Ip Communicator One Way Audio Vpn
Now that you know Cisco Ip Communicator One Way Audio Vpn, we suggest that you familiarize yourself with information on similar questions.
