We have collected the most relevant information on Cisco Callmanager One Way Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
How to troubleshoot one-way / no audio issues - Cisco ...
https://community.cisco.com/t5/collaboration-voice-and-video/how-to-troubleshoot-one-way-no-audio-issues/ta-p/3164442
This example shows a one-way audio, the call flow is SIP phone calls an SCCP phone . SIP phone relevant info is marked in blue. SCCP phone …
CallManager H.323: One-way Voice Issue after ... - Cisco
https://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-callmanager/8604-oneway-voice-after-transfer.html
This document describes the scenario in which a user gets one way audio issue with Cisco CallManager after a call is transferred or placed on hold, if the H.323 endpoint that is configured on the CallManager is a Fast Ethernet subinterface of the gateway. This occurs especially when the Music on Hold (MOH) is enabled. Problem
Solved: CUBE - One way audio - Cisco Community
https://community.cisco.com/t5/unified-communications/cube-one-way-audio/td-p/4432836
Hi, We are facing one way audio connecting to a SIP provider. Callee cant hear the voice of caller, the other way is fine. I can see rx and tx packets increasing during the call. *** IP Phone - CUCM - CUBE - SIP Provider Router - SIP Server *** Provider had confirmed that they are not receiving any ...
Solved: CUBE: one way audio - Cisco Community
https://community.cisco.com/t5/ip-telephony-and-phones/cube-one-way-audio/td-p/2797681
Leg 1 of the call. Iinternal ip phone is sending media to10.75.32.241 (it looks like cucm is invoking a xcoder/mtp for this call), the CUBE is also sending its media to the xcoder which is itself. leg 2 of the call.. CUBE is sending media to 193.246.244.68 and ITSP is sending media to 192.168.10.2.
One way audio - Cisco: Call Manager - Tek-Tips
https://www.tek-tips.com/viewthread.cfm?qid=1782008
I have an issue where making an outbound external call to two specific numbers, I get one way audio. The phones in question are on our telco's integrated business solution plan. (That is what they call it) The phones are in a hunt group that will allow multiple phones to ring when one of the two phones are dialed.
Field Notice: Cisco CallManager Express Sites May ...
https://www.cisco.com/c/en/us/support/docs/field-notices/620/fn62100.html
One Way Audio: The PSTN user calls directly into Auto-Attendant on CUE, then presses '1' to enter extension they wish to reach. The PSTN user then dials the extension of the IP phone they would like to reach. Call setup is completed fine, but results in one way audio. The IP Phone user is able to hear audio from the PSTN user, but the PSTN user cannot hear audio …
One Way Communication - Cisco: Call Manager - Tek-Tips
https://www.tek-tips.com/viewthread.cfm?qid=1428909
Site B has a call manager publisher These two call manager are not on the same cluster. I have established a connection with Site A and Site B with an inter-cluster trunk (non-gatekeeper controller). I was having one way audio communication between Site A and Site B until I check the MTP required then I receive two way audio communication.
Now you know Cisco Callmanager One Way Audio
Now that you know Cisco Callmanager One Way Audio, we suggest that you familiarize yourself with information on similar questions.
