We have collected the most relevant information on Cisco Asa Sip One Way Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
ASA 5510 SIP and One way audio - Cisco Community
https://community.cisco.com/t5/network-security/asa-5510-sip-and-one-way-audio/td-p/1910523
ASA 5510 SIP and One way audio. I am banging my head against the wall as I am trying to figure this out. We have a asterisk based PBX running on a server and it is not VLAN'd or anything as we have a large pipe coming in. We are using NAT and the problem is that occassionally we have audio issues when we call out to an outside caller, and we ...
How to troubleshoot one-way / no audio issues - Cisco ...
https://community.cisco.com/t5/collaboration-voice-and-video/how-to-troubleshoot-one-way-no-audio-issues/ta-p/3164442
Disabling SIP / SCCP inspect on Cisco ASA * First check what's the policy-map: ... If that clears the issue then you may need to tune SIP inspect, (open a TAC case with the ASA security team), or leave that disabled. ... This example shows a one-way audio, the call flow is SIP phone calls an SCCP phone .
Solved: Cisco ASA SIP - one way audio on external phone ...
https://www.experts-exchange.com/questions/27020702/Cisco-ASA-SIP-one-way-audio-on-external-phone.html
SIP protocol is opened through the ASA, and the phone is able to register. The phone is able to dial an internal extension on the PBX which reads the extension number -- the audio is received by the phone fine. We are NOT able to SEND audio from the phone to the PBX however, and appears to be blocked by the ASA.
Solved: One-Way voice in a call over VPN - Cisco Community
https://community.cisco.com/t5/ip-telephony-and-phones/one-way-voice-in-a-call-over-vpn/td-p/2232262
One-Way voice in a call over VPN. We have a problem with the calls when they come from a user connected through VPN. The topology is the next: VPN User->ASA->ROUTER->User in office. Both users are in inside interface and the command " same-security-traffic permit intra-interface" is configured so the traffic is allowed.
How to punch SIP One Way Audio in the face - UCPros
https://ucpros.net/sip-one-way-audio/
we can go ahead and start punching one way audio in the face. Or in more civilized words, troubleshoot one-way audio. Troubleshooting one-way audio and no audio. The process includes three steps: 1. Find where RTP streams are sent to. 2. Verify whether RTP packets are received. 3. Work through possible issues. The logic is simple,
Now you know Cisco Asa Sip One Way Audio
Now that you know Cisco Asa Sip One Way Audio, we suggest that you familiarize yourself with information on similar questions.
