We have collected the most relevant information on Canreinvite No Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
Solution to the Asterisk problem – no sound when calling ...
https://ixnfo.com/en/solution-to-the-asterisk-problem-no-sound-when-calling-via-nat.html
1. directmedia=no. Earlier in older versions of asterisk, instead of directmedia=no, canreinvite=no was used. To support a NAT connection, specify the qualify parameter: 1. 2. qualify=yes. ;qualify=300. Also in the “general” section you can manually specify the local network and the external asterisk IP address for connections, for example:
Outbound calls have no "inbound" audio until placed on and ...
https://community.asterisk.org/t/outbound-calls-have-no-inbound-audio-until-placed-on-and-off-hold/84311
[friends_internal](!) type=peer host=dynamic context=from-internal allow=all ;canreinvite=no directmedia=no busylevel=1 allowsubscribe=yes [100](friends_internal) secret=password mailbox=100@default qualify=yes keepalive=yes No inbound audio until i put the call on hold and then pick it back up… then the audio is fine both ways…
No Audio on Public-facing FreePBX 15 and Asterisk 16 on ...
https://community.freepbx.org/t/no-audio-on-public-facing-freepbx-15-and-asterisk-16-on-centos-7/68202
canreinvite=no rtpkeepalive=0 nat=force_rport,comedia externip=172.68.92.47. rtp_additional contains: [general] rtpstart=10000 rtpend=20000 rtpchecksums=yes strictrtp=yes. sip_additional. All extensions contains the following: canreinvite=yes session-timers=accept nat=force_rport,comedia
Iphone no audio soft/sip phones external only - Asterisk ...
https://community.asterisk.org/t/iphone-no-audio-soft-sip-phones-external-only/37778
can not get audio on sip/soft phone apps for iPhone, Bria, media 5, 3cxPhone. external only. Everything works if I am on the local network. I can make and send calls but there no audio. Everything works internal and externa for X-Lite on my mac. sip.conf [101] type=friend username=100 secret=1234 host=dynamic context=internal callerid=Iphone canreinvite=no …
One-way audio or not audio at all - Kolmisoft Wiki
https://wiki.kolmisoft.com/index.php/One-way_audio_or_not_audio_at_all
Make canreinvite = no in device settings Device is H323 If while connecting with an H.323 client, you get no audio or garbled audio and messages like this on the Asterisk console: rtp.c:489 ast_rtp_read: Unknown RTP codec 107 received, try to disable Speex or some other codec on Asterisk and/or the client side.
[Asterisk-Users] Cisco 7940 no audio
https://asterisk-users.digium.narkive.com/Fg3kXgaa/cisco-7940-no-audio
Conversation: Cisco 7940 no audio Subject: [Asterisk-Users] Cisco 7940 no audio When we receive or make a call to the outside - they can hear us, but we cant hear them. It may work 1 of 20 times. I have set canreinvite=no and looked at many sites but cannot track down this problem. Current setup: Isdn Eicon Diva card / Capi -> Asterisk --> network.
Now you know Canreinvite No Audio
Now that you know Canreinvite No Audio, we suggest that you familiarize yourself with information on similar questions.
