We have collected the most relevant information on Blackmagic Atem Audio Input. Open the URLs, which are collected below, and you will find all the info you are interested in.


BlackMagic ATEM Mini: Church Sound Input Options - …

    https://www.youtube.com/watch?v=YmNY1dLBgX0
    Subscribe for more! - http://bit.ly/2RkM4TTChurch Live Streaming 101 - https://modernmediaministry.comWhen it comes to the ATEM Mini, you have 2 stereo line/...

ATEM Production Studio 4K | Blackmagic Design

    https://www.blackmagicdesign.com/products/atem
    You can mix your camera audio and other video sources from both HDMI and SDI inputs, as well as external audio from the analog XLR and HiFi audio inputs. You can use the ATEM audio mixer for direct input mixing or use audio follow video …

Blackmagic Forum • View topic - ATEM Mini Audio Input Hum

    https://forum.blackmagicdesign.com/viewtopic.php?f=4&t=108050
    Re: ATEM Mini Audio Input Hum. Unbalanced audio is susceptible to hum and noise. This can come from ground loops, poor shielding or cables near equipment with transformers and power supplies. If the source is balanced, I recommend an isolation transformer mentioned above keeping the unbalanced part of the system short.

Blackmagic ATEM Mini Pro Audio - Edward Ellsworth

    https://edwardellsworth.com/2021/02/18/blackmagic-atem-mini-pro-audio/
    Plug into Mic Input 2. Go to the ATEM Software Control Audio – make sure this on Mic input. – If you plug a lavalier mic in the Mic Input 1 port, open the ATEM Software Control Audio Settings and make sure this is set as Mic input. – Run an 1/8th inch stereo mini cable there to to stereo mini from your computer headphone jack. Open the ATEM Software Control Audio …

Blackmagic Forum • View topic - ATEM Mini Pro - Audio Inputs

    https://forum.blackmagicdesign.com/viewtopic.php?t=111754&p=615921
    The two inputs labeled Mic are both unbalanced stereo or could be configured 2 Channel Mono. Additionally they could each be configured as Mic at a -55 dBu level or Line at a -15 dBu level. This is basically HiFi levels so they will not take +24 signals. As they are unbalanced, proper use of shielding or transformers is recommended. Stay safe.

Now you know Blackmagic Atem Audio Input

Now that you know Blackmagic Atem Audio Input, we suggest that you familiarize yourself with information on similar questions.