We have collected the most relevant information on Betacam Sp Audio Tracks. Open the URLs, which are collected below, and you will find all the info you are interested in.
Matrix AV - Digital Betacam Format
http://www.matrixav.com/reference/digital_betacam_format.htm
These tracks coincide with the tape pattern of the Betacam SP format. Therefore, the longitudinal tracks of the Betacam SP tape can be played back by the stationary heads of the Digital Betacam VTR. In the Betacam SP format, however, the fourth longitudinal track that records an audio CH1 signal is provided in parallel. The VTR with a Betacam playback function thus has a two …
R73-1999 Alignment of record flux levels of Betacam SP ...
https://tech.ebu.ch/docs/r/r073.pdf
Further information on the audio quality achieved using Betacam SP can be found in EBU Information I17-1991 [4]. Audio tracks on Betacam SP tapes should be allocated in accordance with EBU Recommendation R38-1992 [5]. Bibliography [1] [EBU document Tech. 3219: Measurements and operational alignment of television tape-
Betacam SP UVW series VTRs
https://www.oocities.org/globalpro_equipment/Sony/model/betacam_sp_uvw-series_vtrs.pdf
Audio performance (Metal particle tape) Frequency response: 50 Hz to 15 kHz +2.0-3.0 dB S/N ratio (at 3% distortion level): More than 70 dB Distortion T.H.D. (at 1 kHz at reference level): Less than 1.5% Wow and flutter: Less than 0.18% rms Signal inputs REF VIDEO IN: BNC, 1.0 Vp-p, 75 Ω Signal outputs VIDEO OUT-1: BNC, Composite video, 1.0 Vp-p, 75 Ω,
Now you know Betacam Sp Audio Tracks
Now that you know Betacam Sp Audio Tracks, we suggest that you familiarize yourself with information on similar questions.
