We have collected the most relevant information on Beaglebone Audio Cape Angstrom. Open the URLs, which are collected below, and you will find all the info you are interested in.
BeagleBone Audio Cape
https://groups.google.com/g/beagleboard/c/qdLcceqH3ms
The BeagleBone Audio Cape provides stereo audio input and output for the BeagleBone by using the TLV320AIC3106 codec. Audio data is sampled at up to 96 kHz during recording or playback. The codec...
BeagleBone Audio Cape Rev A1 System Reference …
https://www.openhacks.com/uploadsproductos/beaglebone-audio-reva1-srm.pdf
The BeagleBone Audio Cape should work right out of the box with latest Angstrom image for BeagleBone. Following the instructions below to verify the board is working: 1. Mount the BeagleBone Audio Cape on top of BeagleBone. • Note: The Ethernet connector on BeagleBone should fit right into the cutback on BeagleBone Audio. 2.
beagleboneblack - Beagle Bone Black Audio Cape rev B ...
https://stackoverflow.com/questions/25827183/beagle-bone-black-audio-cape-rev-b-synchronization-issues
Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels WAV file (s) Rate set to 48000Hz (requested 48000Hz) Buffer size range from 128 to 32768 Period size range from 8 to 2048 Using max buffer size 32768 Periods = 4 was set period_size = 2048 was set buffer_size = 32768. 0 - Front Left Time per period = 0.641097.
Now you know Beaglebone Audio Cape Angstrom
Now that you know Beaglebone Audio Cape Angstrom, we suggest that you familiarize yourself with information on similar questions.
