We have collected the most relevant information on Avid 888 Audio I/O Interface. Open the URLs, which are collected below, and you will find all the info you are interested in.
888 Audio Interface - Avid Technology
http://archive.digidesign.com/support/propix/888io.html
888 Audio Interface. Dealer Order Code. MH061 (-PCI or -Nubus determines correct cable type) Supported Sample Rates. 44.1 and 48 kHz. A/D . 1-bit Delta-Sigma;128x Oversampling 16-bit output (18-bit output with PCI cards) D/A. 18-bit; 64x Oversampling. S/N-104dB (A-Weighted) THD.004%, 0 dbFS @ 1kHz, 22 Hz - 22 kHz bandwidth. Frequency Response. 20Hz to 20kHz, ± …
Avid 888 I/O Digi Desgin MH070-AV Interface Stand Alone ...
https://www.saveonkit.com/avid-888-io-digi-desgin-mh070-av-interface-stand-alone-audio-equipment-10117-p.asp
The 888 I/O is an audio interface used with Pro Tools Project (3.2 or later), Pro Tools III (3.0 or later), or Session 8 PC (2.5 or later). It connects to any of the following cards: PT Project, Disk I/O, Bridge I/O, or Session 8 PC I/O. Analog Input/Output: Balanced XLR, pin 2 hot, internally switchable +4dBu/-10dBu per channel.
Avid Digidesign 888 Audio I/O, Model MH068-AV - bibbteck.com
https://www.bibbteck.com/avid-digidesign-888-audio-io-model-mh068-av
Avid Digidesign 888 Audio I/O, Model MH068-AV. Very clean Digidesign 8 channel Audio interface for Protools or Avid NLE setups. Manufacturer: Avid. Availability: 1 in stock. €101.32. Qty: AddThis. This interface was removed from a working edit suite (with Avid 0020-00365-01 BoB), and is in VVG cosmetic condition.
AVID 888 I/O stand alone mode - Avid Community
https://community.avid.com/forums/t/68841.aspx
Avid 888 is strictly for Audio. It interfaces with the Meridien BOB or Break out box which you use to ingest/output media. The Meridien I/O board has an optional SDI top card. Known as the falcon, the optional SDI top lets you ingest or output SDI, the analog portion of the falcon, composite, component or S Video.
AVID Digidesign 888|24 i/o 8 Channel Analogue & Digital ...
https://reverb.com/item/39946724-avid-digidesign-888-24-i-o-8-channel-analogue-digital-audio-interface-for-protools
Digidesign 888|24 i/o interface. 8 x XLR analogue & 8 x AES Digital ins and outs. Hardware rack unit only, requires computer interface and Protools software. Here's a link to the original installation manual. akarchive.digidesign.com/support/docs/888_24_IO_Guide.pdf. Please check the Avid site for compatibility with your Protools system.
Avid Digidesign 888 Audio I/O interface for vintage Pro ...
https://reverb.com/item/7525408-avid-digidesign-888-audio-i-o-interface-for-vintage-pro-tools-systems
Here's a used but in nice condition Avid Digidesign 888 Audio I/O interface. Tested to power up, which it did (don't have all the Pro Tools bits and pieces set up to do more thorough testing than power up, so selling it as-is.) Should be great for a vintage Pro Tools system. It's model "MH070-AV, Rev. J". The product code is "888 I/O, MC AVID".
Now you know Avid 888 Audio I/O Interface
Now that you know Avid 888 Audio I/O Interface, we suggest that you familiarize yourself with information on similar questions.
