We have collected the most relevant information on Audiomatica Clio Microphone. Open the URLs, which are collected below, and you will find all the info you are interested in.
						
						
						
						
						
						Microphones | Audiomatica Srl
						https://www.audiomatica.com/wp/?page_id=224
						Audiomatica MIC microphones can be directly connected to your CLIO system’s input. The frequency response is individually tested against specifications and the sensitivity value is supplied. The following certificate is supplied with each microphone:
						 
						
						
						
						CLIO Pocket 1 | Audiomatica Srl
						https://www.audiomatica.com/wp/?page_id=1739
						The system is composed of multi-platform Clio Pocket software, Clio CP-01 Audio Interface hardware plus accessories. The Clio CP-01 Audio Interface uses an USB 2.0 connection for maximum portability and compatibility with current and future computer hardware architectures. TECHNICAL SPECIFICATIONS CP-01 AUDIO INTERFACE MIC-02 MICROPHONE
						 
						
						
						
						Audiomatica Srl
						https://www.audiomatica.com/wp/
						You can 3D print your own Audiomatica microphone stand adapter. The adapter has a 5/8'' standard thread and fits Audiomatica MIC-01, MIC-02 and MIC-03 microphones. We suggest to print with 0.1 mm resolution and 100% infill. Read more → Testing Android Smartphones with CLIO 12.5 QC by admin • 13 November 2020
						 
						
						
						
						Audiomatica MA-01 CLIO Pocket Microphone Clip Accessory Pack
						https://www.parts-express.com/Audiomatica-MA-01-CLIO-Pocket-Microphone-Clip-Accessory-Pack-390-902
						Audiomatica MA-01 CLIO Pocket Microphone Clip Accessory PackAudiomatica's MA-01 microphone accessory pack includes an adaptor for standard 1/2" acoustic calibrators and microphone clip specifically for use with the MIC-02 included with the CLIO Pocket acoustic measurement system.The microphone clip uses a 5/8"-27 TPI mount to fit most mic stands. …
						 
						
						
						
						CLIO 12 | Audiomatica Srl
						https://www.audiomatica.com/wp/?page_id=2829
						CLIO is a system: it is including the Audiomatica CLIO FW-02 interface as hardware and it is running the CLIO 12.5 STND Standard Software or CLIO 12.5 QC Quality Control (which has also extended features not only related to Quality Control). These two parts (hardware plus software) can not function separately. The FW-02 USB Audio Interface sets ...
						 
						
						
						
						Audiomatica CLIO Pocket Version 2.1 Personal Acoustic ...
						https://www.parts-express.com/Audiomatica-CLIO-Pocket-Version-2-Personal-Acoustic-Measurement-System-390-900
						
						 
						
						
						
						Accessories | Audiomatica Srl
						https://www.audiomatica.com/wp/?page_id=264
						AA-001 1/2” to Microphone Adapter This adapter fits Audiomatica microphones MIC-01, MIC-02 and MIC-03 to a standard 1/2 inch. microphone calibrator. Accelerometer ACH-01 The accelerometer ACH-01, from Measurement Specialties, is a low-cost, general purpose transducer that satisfies your needs of vibration monitoring and measurement.
						 
						
						
						
						Calibration Services | Audiomatica Srl
						https://www.audiomatica.com/wp/?page_id=245
						The microphones can be furnished* with (or be submitted for) a frequency calibration certificate.** This document, along with numerical data on floppy disk, is released by Audiomatica and specifies the frequency behaviour of the single microphone under test. The file data can be used with the CLIO and the CLIOwin software.
						 
						
						
						
						Audiomatica Calibrated Measurement Microphone
						https://www.soundimports.eu/en/audiomatica-calibrated-measurement-microphone.html
						This microphone is a calibrated electret measuring microphone that is particularly well suited to being used in conjunction with the other components of the CLIO system. It is supplied with a calibration certificate, calibration data, cable, stand adapter and 1/2” calibrator adapter, all fitted in an elegant plastic case.
						 
						
						
						
						Microphone Preamplifier | Audiomatica Srl
						https://www.audiomatica.com/wp/?page_id=234
						The microphone preamplifier PRE-01 has been designed to match Audiomatica’s microphones MIC-01, MIC-02 and MIC-03. It is particularly useful when the microphone has to be operated far from the analyzer or when weighted measurements are needed. PRE-01 powers the microphone connected to its input with an 8.2V phantom supply
						 
						
						
							
						Now you know Audiomatica Clio Microphone
						Now that you know Audiomatica Clio Microphone, we suggest that you familiarize yourself with information on similar questions.