We have collected the most relevant information on Audiofire 8 Vs. Open the URLs, which are collected below, and you will find all the info you are interested in.
Echo Audiofire8 vs. Konnekt 24D - Gearspace.com
https://gearspace.com/board/low-end-theory/112272-echo-audiofire8-vs-konnekt-24d.html
2. 24/192(konnekt) vs 24/96(audiofire) - dont think this matters too much 3. 14(konnekt) vs 10(audiofire) channels 4. konnekt has some built in DSP functionality 5. konnect (cubase) vs. traktion (audiofire) - i know little about DAW software so i dont know anything on this point. Cons: 1. Drivers for Konnect may not be as mature as the Audiofire.
Echo Audiofire Pre 8 - Sound On Sound
https://www.soundonsound.com/reviews/echo-audiofire-pre-8
The Audiofire Pre 8 cannot be bus-powered, but has a built-in power transformer, so can be plugged into the mains without requiring an external power supply. The Pre 8's physical layout is very similar to that of the Saffire Pro 40, in that all the I/O is on the rear panel with the exception of the headphone outputs and the inputs to the first ...
Echo Audio AudioFire 8 review | MusicRadar
https://www.musicradar.com/reviews/tech/echo-audio-audiofire-8-21867
Nominally, the AudioFire 8 under-sells itself, as if you include the digital S/PDIF/AES I/O - as most manufacturers do in their specs - it actually has ten inputs and ten outputs. It also has MIDI In and Out and even Word Clock In and Out for external digital synchronisation. As you'd expect these days, it runs at 24-bit resolution and at up to ...
Echo AudioFire 8 Interface | zZounds
https://www.zzounds.com/item--ECHFIRE8
The Audiofire 8 sincerely has great converters, and honestly with converters in the mid-high end of the market there's not a huge difference between the options you have. I did my first test with an acoustic guitar recording, and it certainly came out very well, and definately transparent. The preamps aren't so great, they're kind of comparable ...
Tape Op | EH 12AY7 vs. gap 73 vs. duet preamps vs ...
https://messageboard.tapeop.com/viewtopic.php?p=576407
EH 12AY7 vs. gap 73 vs. duet preamps vs. audiofire 8 preamps. Post by slowlygrowl » Fri Nov 06, 2009 2:21 am Hello, I am trying to put together a small recording set up with my macbook for around $800. I have a 57 and a 58 and had been using a Firebox(crap) when recording to computer. I record just by myself track by track, various instruments ...
Echo Audiofire 8 Audio Interface | Daniel's Shop | Reverb
https://reverb.com/item/32879575-echo-audiofire-8-audio-interface
The AudioFire 8 16 I/O FireWire Audio Interface from Echo is a 16 input/16 output audio interface with FireWire .The unit allows for recording 24-bit/96kHz audio with low latency monitoring on Windows or Mac OS X computer (desktop or notebook) with a FireWire port.
* Audio Interface * Edirol vs. Echo | Cakewalk Forums
http://forum.cakewalk.com/Audio-Interface-Edirol-vs-Echo-m1851266.aspx
the audiofire has those same two + the 2 extra 1/4" only ones. The Gina has 6 1/3" outs, where the AFire has 4. The Gina has ADAT in and out, so you can easily add more preamp inputs (like I mentoined above with the ADA8000 or Echo now even has the …
AudioFire Windows Manual v2.2 - Echo Digital Audio
http://files.echoaudio.com/manuals/audiofire_windows_manual_v2.2.pdf
If you have AudioFire 8, AudioFire Pre8 or AudioFire 12, plug the power cable firmly into the interface and a power socket, and then turn on the interface by pressing the power button. If you have AudioFire 2 or AudioFire 4 and your computer’s FireWire port has a 6-pin connector, your AudioFire can be powered directly through FireWire.
Echo Digital Audio Corporation
http://files.echoaudio.com/drivers/windows/Echo_FireWire_%205.8_PC_readme.pdf
The AudioFire console supports saving and loading the state of the AudioFire device to a file, called a “session”. Sessions are stored in the “My Documents” folder in a sub-folder named after the device. For example, AudioFire 8 sessions are stored in …
Echo Audiofire 4 - Sound On Sound
https://www.soundonsound.com/reviews/echo-audiofire-4
The Audiofire 4 features four-in/four-out, 24-bit/96kHz analogue connectivity (hence the '4' in the model name), with an additional two-in/two-out digital channels via S/PDIF. Two of the analogue inputs offer 48V phantom power. The analogue and digital channels can be used together for simultaneous six-in/six-out operation, all via Firewire to ...
Now you know Audiofire 8 Vs
Now that you know Audiofire 8 Vs, we suggest that you familiarize yourself with information on similar questions.
