We have collected the most relevant information on Audiocontrol Three.1 Vs Four.1. Open the URLs, which are collected below, and you will find all the info you are interested in.


Audio Control Three.1 *** VS *** Four.1 - Head Units ...

    https://www.stevemeadedesigns.com/board/topic/2299-audio-control-three1-vs-four1/
    The 3.1 has subwoofer control but no aux in. 4.1 has fader and aux in but no sub. The Zapco sp4-sl has subcontrol and fade, but you would need symblink adapters. I would do the 3.1 if I were you. Great piece. Sure there are hundreds of pre-amps, but only a …

AudioControl three.1 VS four.1??? | Car Audio Forum ...

    https://www.caraudio.com/threads/audiocontrol-three-1-vs-four-1.97852/
    FOR SALE Equalizers, batteries, Audiocontrol processor and more! Stock Head Unit and aftermarket amps through an AudioControl LCQ-1. AUDIOCONTROL 1500.1 TOO MUCH FOR JLw6v3 10". FOR SALE AudioControl D-4.800 or D-6.1200. Help Installing AudioControl LC7i in 2012 Dodge Journey.

THREE - AudioControl

    https://www.audiocontrol.com/downloads/car/discontinued/Three1%20Owners%20Manual.pdf
    Figure 2: Front View of THREE.1 4. Fader: When amplifier channels are connected to the front and rear outputs, the fader control will allow you to fade the signal level back and forth. This also means you can have front and rear fading even though your source unit only has 2-channel outputs. 5. Volume: Because the THREE.1 is a pre-amp unit, it

Four.1i - AudioControl

    https://www.audiocontrol.com/car-audio/in-dash-processors/four-1i/
    FOUR.1 i IN-DASH EQUALIZER WITH AUX INPUTS (discontinued) If your performance car audio system is designed for maximum sound quality and maximum control, then the FOUR.1i is the car audio processor for you. Designed to be the world’s first professional quality in-dash equalizer, the FOUR.1i boasts such features as 13 volt signal capabilities ...

AudioControl FOUR.1 In-dash equalizer with line driver at ...

    https://www.crutchfield.com/ISEO-rmsbcspd/p_161FOURP1/AudioControl-FOUR-1.html
    Description: The Four.1i is a combination equalizer/line driver. The 1/2 DIN chassis can be mounted in-dash, or under-dash using the included brackets. 4 Band Graphic EQ: The rotary knobs adjust the signal +/-12 dB at 125 Hz, 500 Hz, 2 kHz, and 8 kHz. There's a notch at each knob's center position so it's easy to return to the flat setting.

FOUR - AudioControl

    https://www.audiocontrol.com/downloads/car/current/four1i/four1i-user-manual.pdf
    AudioControl components after your FOUR.1i, they can handle the maximum output of the FOUR.1i. More info on this in the section on “Level Matching” - page 11. 10. Output Jacks: Next to the inputs are the outputs which should be connected to the front and rear amplifiers, if applicable. A pair of EQLs and a 3XS would work wonder-fully here. 11.

Now you know Audiocontrol Three.1 Vs Four.1

Now that you know Audiocontrol Three.1 Vs Four.1, we suggest that you familiarize yourself with information on similar questions.