We have collected the most relevant information on Audiocodes T 38 Asterisk. Open the URLs, which are collected below, and you will find all the info you are interested in.
Verizon T.38 FAX Configuration Guide for …
https://www.audiocodes.com/media/11262/verizon-t38-fax-configuration-guide-for-audiocodes-mp-11x.pdf
Audiocodes T.38 FAX Configuration Guide Verizon T.38 FAX Configuration Guide for AudioCodes MP-11x 30-APR- 2011 Version 1.0 Page 5 Page 5 of 42 1. Preliminary The primary purpose of this document is a configuration guide to be used by Verizon
Re: T.38 with Audiocodes gateway [SOLVED] - ReadList.com
https://readlist.com/lists/lists.digium.com/asterisk-users/31/156458.html
> a lack of T.38 sdp parameters on the initial INVITE. > OK > > > 2. Is it possible to configure Asterisk to pass T.38 settings in SDP in > the > > first INVITE it sends ? > > > > 3. Any suggestion with Audiocodes gateway ? > > Look for T.38 settings maybe? See if there is something keeping you > from sending an initial invite with non-T.38 SDP ...
MediaPack 1xx (MP-1xx) Analog VoIP Gateways - …
https://www.audiocodes.com/solutions-products/products/digital-and-analog-media-gateways/mediapack-1xx
T.38 fax compliant Overview AudioCodes’ MediaPack 1xx series of analog VoIP gateways offer service providers and enterprises superior voice technology for connecting legacy telephones, fax machines and PBX systems with IP telephony networks and IP-PBX systems.
Configuring AudioCodes MP-112 VoIP Gateway for Fax with ...
http://nachbar.name/2011/06/29/audiocodes-mp-112-fax-with-asteris/
However, it is set by default to intercept any faxes and route them via T.38. T.38 only works if the receiving system is expecting T.38 (Asterisk is not capable of taking T.38 and turning it into a regular fax). If you don’t disable the T.38, simple faxes might squeak through, but even full page faxes will get intercepted.
T.38 Fax Support, Hype or Reality? - blog.tmcnet.com
https://blog.tmcnet.com/blog/tom-keating/voip/t38-fax-support-hype-or-reality.asp
AudioCodes also makes voice TDM hardware which runs on the Asterisk platform. The other issue with T.38 is that T.38 capabilities vary greatly between VoIP providers. Some do not support it at all, while others support it fully, up to and including V.34 FAX (high speed 33,600bps faxing).
FFA SendFax rejects T.38 reINVITE (488 Not acceptable here)
https://gmane.comp.telephony.pbx.asterisk.user.narkive.com/DmkaLnJe/ffa-sendfax-rejects-t-38-reinvite-488-not-acceptable-here
As I showed in the logs, the remote carrier sends a proper T.38 reINVITE, but our Asterisk doesn't accept, despite the fact that this provider is defined in sip.conf with both canreinvite and t38pt_udptl enabled, so the only question is (as far as we understand) is why in this scenario, the T.38 is rejected.
Anyone use PJSIP and Audiocodes FXS port used for paging ...
https://community.asterisk.org/t/anyone-use-pjsip-and-audiocodes-fxs-port-used-for-paging/68148
We have an Audiocodes Mediant 1000 with a FXS module. We have an overhead paging system connected to one of the FXS ports and were using chan_sip without any issues paging. Moved to chan_pjsip and can’t seem to find the write configuration within pjsip.conf to send the call from Asterisk to the Audiocodes. Looking for any help or anyone with knowledge …
Now you know Audiocodes T 38 Asterisk
Now that you know Audiocodes T 38 Asterisk, we suggest that you familiarize yourself with information on similar questions.
