We have collected the most relevant information on Audiocodes Mediant 1000 Ini File. Open the URLs, which are collected below, and you will find all the info you are interested in.
AudioCodes Mediant 1000 Configuration Guide
https://know.altigen.com/attachments/1113/AudioCodes_Mediant1000_MaxCS7.pdf
Appendix C: AudioCodes ini File ... (Mediant 1000 MSBG User's Manual Ver. 6.4) Mediant 1000B SIP Installation Manual Release Notes Configuring Syslog Technical Note (Configuring Syslog Technical Note Ver. 6.2) ... AudioCodes Mediant 1000B and …
AudioCodes INI File Upload Steps (All Versions)
https://content.us.dynabook.com/tsd/tech/soft_ipedge/gw/AudioCodes_INI_file_upload_steps_(all_versions).pdf
AudioCodes Configuration Wizard INI file upload steps (all version) BASIC CONFIGURATION Power up the Mediant 1000 and connect the NIC to a hub, switch or network. 1. Using a PC connected to the hub, switch or network launch a internet browser such as Windows Explorer. 2. Enter the Default IP address of the Mediant 1000 which is 10.10.1.10 3.
Mediant 1000B - AudioCodes
https://www.audiocodes.com/media/9663/ltrt-12470-audiocodes-mediant-voip-gateway-and-avaya-aura-messaging-with-nortel-communication-server-1000-using-t1-qsig-configuration-note.pdf
ini configuration file (*.ini file) – see Section 5.1 Configuring the gateway via the Web interface – see Section 5.2 5.1 Configuring the ini File For initial setup and configuration, you can upload an file (*.ini) to AudioCodes the ini gateway that includes the template ini file settings shown in Appendix
AudioCodes Mediant 1000 Configuration - Altigen
https://know.altigen.com/attachments/1266/AudioCodes-Mediant1000.pdf
AudioCodes Mediant 1000 Configuration Guide for MAXCS 8.5 Page 11 of 27 4. On row 1, set Proxy Address to the MaxCS server's IP address and port 5060. Figure 10: For Proxy Set ID 0, configure row 1 parameters 5. Set Transport Type to UDP. 6. Set Enable Proxy Keep Alive to Using Options. 7. Click Submit. Set VoIP Coder Parameters
AudioCodes Quick Reference Guide - How to Upload ...
https://www.audiocodes.com/media/14271/audiocodes-quick-reference-guide-how-to-upload-incremental-ini-file-changes.pdf
Use the following steps for an Incremental INI file load 1. Click on the Setup tab and go to Administration =>Maintenance => Load Auxiliary Files. 2. Click on the Browse Button for INI file (incremental). 3. Find the INI file that you want to upload with the incremental changes. 4. …
Published by AudioCodes’ Interoperability Laboratory
https://www.audiocodes.com/media/9167/avaya-communication-manager-with-audiocodes-mediant-1000-mediant-2000-and-mediapack-1xx.pdf
Define the following 9 parameters in the ini file that relate to configuring the Mediant 2000, Mediant 1000 and MP-11x to interoperate with the Avaya CM. Note that AudioCodes’ H.323 gateway doesn’t register in the Avaya CM: 1. Connection Mode = Normal ( ini parameter IsFastConnectUsed = 0) 2. H.225 Listen Port = h.225 gateway TCP port. By default, it is equal …
MAXCS 8.0 AudioCodes Mediant-1000 TLS Configuration Guide
https://know.altigen.com/attachments/1195/AudioCodes-Mediant1000-TLS.pdf
AudioCodes Mediant 1000 TLS Configuration for MAXCS 8.0 Page 12 of 27 Figure 11: Select VoIP > Coders and Profiles > Coders Set VoIP Trunk Group Parameters Configure VoIP Trunk group settings. 1. Choose VoIP > GW and IP to IP > Trunk Group > Trunk Group. 2. For each trunk group, set these parameters:
Backup and Restore Procedure - AudioCodes
https://www.audiocodes.com/media/10263/ltrt-39624-backup-and-restore-procedure-configuration-note-ver-72.pdf
Save INI File: saves the configuration as an ini file. • Save CLI Script File: saves the configuration as a CLI-based file. 2.2 Backing up Device Configuration through CLI The CLI allows you to back up the device's configuration as a CLI-based file (CLI command settings). You can back up the CLI-based file to any of the following locations:
Now you know Audiocodes Mediant 1000 Ini File
Now that you know Audiocodes Mediant 1000 Ini File, we suggest that you familiarize yourself with information on similar questions.
