We have collected the most relevant information on Audio Noise In Ft-897. Open the URLs, which are collected below, and you will find all the info you are interested in.


Yaesu FT-897 Audio noise reduction mod - YouTube

    https://www.youtube.com/watch?v=sRu-Us1E0tQ
    Noise reduction mod on the Yaesu FT-897.On my Blog - https://m0tef.blogspot.com/2019/04/modifying-ft-897-to-get-best-from-it.htmlI have been using my …

FT-897D/857D - DISTORTED AUDIO REPORTS ON SIDEBAND - …

    http://www.w1aex.com/897idle/897idle.html
    More than a few owners of the older FT-857/897 series of radios have received the bad news that their radios sound absolutely terrible in the sideband mode. Reports of trouble are often mistaken for RF feedback or poorly adjusted audio. Others have …

Audio processing and ALC in the FT-897D - Webs

    https://g8jnj.webs.com/FTALC.pdf
    Audio processing and ALC in the FT-897D I recently bought an FT-897D, and after a period of operation noticed problems with what I perceived to be a low average level of output power and reports of muffled audio. This is the story of my investigation to improve the audio quality and increase the average level of transmitted power.

FT-897 Data Port Audio In Level | QRZ Forums

    https://forums.qrz.com/index.php?threads/ft-897-data-port-audio-in-level.739411/
    I am trying to get an FT-897 to work with packet using the data port connected to a rasberry pi running direwolf. I am using the Fe-Pi soundcard and a transistor PTT circuit wired to to the Pi's GPIO pins. Everything seems to be working, except for the audio level. The 1200 baud output from the radio is connected to the Fe-Pi line in left channel.

DG2IAQ Modification Sheet YAESU FT-897 - RigPix

    https://www.rigpix.com/yaesu/ft857-897_modcollection.pdf
    R2/R3 is a resistor attenuator as electret capsules have much more audio output level than dy- namic capsules. Audio distortions and overdrive of the FT-897 mic amp would occur. The value of R2 varies on the used electret capsule, as some has more or less internal audio amplification (5.6mV or 7.9mV output).

Articles for Yaesu 'FT-897' - mods.dk

    https://www.mods.dk/index.php?ModelId=69
    Yaesu FT-857/897 fan noise in TX audio: 16 Jul 2016: FT-857/897 undocumented feature: 11 Jul 2016: Service menu points for FT-897 in Excel: 09 May 2014: FT-897D fix DC voltage on CF5: 13 Feb 2013: FT857-FT897 Filter Pandemic: some practical repair: 03 Dec 2011: Yaesu FT-897 no power-on: 16 Sep 2010

YAESU FT 897d Audio Modifications - WorldwideDX Radio Forum

    https://www.worldwidedx.com/threads/yaesu-ft-897d-audio-modifications.213297/
    You will probably have to change some menu settings to switch the am/ssb audio input from the mic jack to the data plug. It still won't be wide band, maybe 3 to 4k max. You could use something like a behringer 802 mixing board. It has a mic preamp, 3 band eq and phantom power if you use a condenser mic.

HF/VHF/UHF ALL MODE TRANSCEIVER FT-897 - Yaesu

    https://www.yaesu.com/downloadFile.cfm?FileID=671&FileCatID=158&FileName=FT%2D897%5FOpMan.pdf&FileContentType=application%2Fpdf
    The FT-897 is a rugged, innovative multiband, multi- mode portable transceiver for the amateur radio MF/HF/ VHF/UHF bands. Providing coverage of the 160-10 meter bands plus the 6 m, 2 m, and 70 cm bands, the FT-897 in- cludes operation on the SSB, CW, AM, FM, and Digital modes, yielding the most comprehensive performance pack-

Ham Radio - FT897d Settings - Coilgun

    https://www.coilgun.info/hamradio/ft897-settings.htm
    FT-897D Settings. These are the settings I am using on my FT-897D. It reflects a base installation with the Heil Traveller Headset. The headset has a high-output mic and experimentation found the gain needs to be set much lower than the stock microphone to avoid overdrive and distortion.. Radio Settings

mods.dk -> YAESU -> FT-897 -> Yaesu FT-857/897 fan noise ...

    https://www.mods.dk/view.php?ArticleKey=ad51f87047f8f648dd39a1b9e8a9c687
    This problem devloped with my 'rescue radio', the ft-897 in which I recently replaced the corroded crystal IF filters (see existing mods for this know

Now you know Audio Noise In Ft-897

Now that you know Audio Noise In Ft-897, we suggest that you familiarize yourself with information on similar questions.