We have collected the most relevant information on Audio Line Balancing Transformer. Open the URLs, which are collected below, and you will find all the info you are interested in.


Palmer Audio PMT06 Audio Balancing Transformer | …

    https://www.conrad.com/p/palmer-audio-pmt06-audio-balancing-transformer-548934
    Palmer Audio PMT06 Audio Balancing Transformer. Item no.: 548934. Manufacturer no.: PMT06. EAN: 2050001470607. Guaranteed product originality. For audio applications such as adapters, DI boxes, galvanic separation at microphone and line (NTL) level. This text is machine translated. Full description. Warranty: 24 months.

Balancing, Isolating and Splitting Line Level Audio ...

    https://www.dcsoundop.com/balancing-isolating-and-splitting-balanced-line-level-audio/
    Balancing, Isolating and Splitting Line Level Audio. In: All Posts. ... The biggest difference between a line and microphone transformer splitter, is the amount of signal the transformer can cope with before saturation and distortion occur. It is important to be sure you are are using transformers capable of handling the signal you are sending ...

Line Balancing Unit AR-204 - BSS Networked Audio Systems

    https://bssaudio.com/en/product_documents/ar204dspdf
    BSS Audio Line Balancing Unit AR-204 TECHNICAL SPECIFICATIONS Custom designed audio toroidal transformer for 600Ohm line level output balancing. INPUTS Maximum input level +26dBm, 45Hz to 20kHz. Will handle +22dBm at 30Hz and +15dBm at 15Hz OUTPUTS Maximum output load 600Ohms. Less than 0.5dB drop in level for load changes from 10k to 600Ohms

PC Line Balancing Box - SSE Audio

    https://www.sseaudio.com/Sigma-Products/Electronics-Catalogue/PC-Line-Balancing-Box/
    Input on 3.5mm stereo minijack or twin phono. 1m captive minijack cable with strain relief cable gland. Rugged extruded aluminium casing. Neutrik® XLRs. Metal Neutrik® minijack. Dimensions: 80mm (W), 80mm (L), 44.5mm (H) With this passive stereo transformer you can easily convert an unbalanced, low impedance headphone or line output to a balanced, isolated pair suitable for a …

Palmer Audio PMT06 Balancing Split Transformer for Line Levels

    https://www.markertek.com/product/plm-pmt06/palmer-audio-pmt06-balancing-split-transformer-for-line-levels
    Shop Palmer Audio PMT06 Balancing Split Transformer for Line Levels. Search all Palmer Audio in Audio Distribution Amplifiers.

Palmer Audio PMT08 Balancing Transformer 1:1

    https://www.markertek.com/product/plm-pmt08/palmer-audio-pmt08-balancing-transformer-1-1
    Home recording level (-10 dB) line isolating transformer balances CD players, tape decks etc. Electrostatic and mu-metal shielding, PCB mount. PCB for 4 x PMT-08 available (#PCB-08). Technical specifications: Ratio 1 : 1 Impedance: 10,000 ohms Frequency range: 30 Hz - 20 kHz, +/- 1 dB Level: + 6 dB max. Dimensions: (without pins): 30 x 30 x 20 mm

Audio Transformers • Problem solvers • Lundahl Transformers

    https://www.lundahltransformers.com/problem-solvers/
    Stereo Isolation and Balancing Unit. SIB15 is the perfect tool for connecting unbalanced audio sources such as laptops and tablets to professional audio systems. In particular when a laptop is the source for both audio and video signals, SIB15 eliminates any ground loops which are the most common sources of hum and noise. XLR inline transformer units

Audio Transformers - Learn About Electronics

    https://www.learnabout-electronics.org/ac_theory/transformers04.php
    This is a type of transformer for matching balanced transmission lines or cables to, or from an unbalanced input or output, (the device is reversible). A simplified Schematic of a balun is shown in Fig. 11.4.4. Fig. 11.4.5 shows a typical microphone transformer that plugs directly into an unbalanced high impedance amplifier input.

Audio line isolation transformer - ePanorama

    https://www.epanorama.net/circuits/audio_isolator.html
    Basically a transformer slows down upper frequencies and allow the low frequencies to pass first, creating what we perceive as a "fat/warm" tone. Inadequate frequency response on the low end (rolloff at like 20Hz), causes low frequencies to be "slowed", allowing the upper frequencies to be heard first, this is perceived as "barky/ brittle". High-quality audio transformers cover whole …

Now you know Audio Line Balancing Transformer

Now that you know Audio Line Balancing Transformer, we suggest that you familiarize yourself with information on similar questions.