We have collected the most relevant information on Audio Interrupt Lead. Open the URLs, which are collected below, and you will find all the info you are interested in.
Audio Interrupt – Hear 2-Way Radios Through Vehicle …
https://audiointerrupt.com/
Seamless and fully automatic interaction between the vehicle stereo speakers and a two-way radio or other receiving device equipped with a 1/8” (3.5mm) speaker output jack such as on a GPS, CB, FRS, GMRS, VHF, UHF, Ham Radio or Radar Detector. When audio is present (volume, set at a pleasant listening level) on a 2 way-radio, the stereo ...
AUDIO INTERRUPT WIRING INSTRUCTIONS FOR SCANNER
https://www.scannermaster.com/v/vspfiles/files/pdf/audio-interupt.pdf
AUDIO INTERRUPT . takes only a few minutes with 5 easy steps. 1. The Male Speaker Plug . from the . Audio Interrupt . plugs into the scanner’s 1/8” speaker output socket. 2. The Female Speaker Socket . from the . Audio Interrupt . connects to the . Remote Speaker’s Plug 3. Black Lead . wire of the audio interrupt with a ring terminal connects to the chassis ground. Attach to
FAQ – Audio Interrupt
https://audiointerrupt.com/faq/
Easily use our CBM-U4, a two or four-channel audio interrupt with onboard speaker switch feature. If you are using 12-volt power supply connected to a mobile 2-way radio in your home or office the power input leads of the CBM-U4 connects to the negative and …
Alpine Audio Interrupt feature - the12volt.com
https://www.the12volt.com/installbay/forum_posts.asp?tid=56199
I don't have an accessory with a wire lead to go to the Alpine's pink/black wire, but I have another project in mind that could use the audio interrupt feature on the CDA-9830, which is why I need to understand whether it is a ground or voltage application to the pink/black wire that activates the audio interrupt. Thanks in advance for any replies!
Audio Interrupt | Scanner Master
https://www.scannermaster.com/Audio_Interrupt_p/45-561488.htm
The AUDIO INTERRUPT is a voice activated car stereo muting device that allows seamless interaction between a car stereo and a CB, scanner or other radio-receiving device equipped with a mono 1/8” speaker output jack such as GPS, FRS,GMRS, ham radio or radar detector. Placement of the AUDIO INTERRUPT is between the radio-receiving device (CB) and a remote speaker.
Intercom Audio Interrupt Module | Video and Voice ...
https://www.legrand.us/audiovisual/intercom-video-and-voice/video-and-voice-accessories/intercom-audio-interrupt-module/p/ic1001
For use with the lyriQ Audio System, the Audio Interrupt Module automatically mutes the music for an intercom page. Global Legrand is established in nearly 90 countries
Now you know Audio Interrupt Lead
Now that you know Audio Interrupt Lead, we suggest that you familiarize yourself with information on similar questions.
