We have collected the most relevant information on Atmel Usb Audio Class. Open the URLs, which are collected below, and you will find all the info you are interested in.


AVR32716: AVR UC3 USB Audio Class

    https://ww1.microchip.com/downloads/en/Appnotes/doc32139.pdf
    This application note demonstrates, through a stand alone application, the usage of the Atmel AVR UC3 USB audio class. The application operates in the USB device mode, enumerating as a “stereo headset with microphone”. It uses the USB Audio and HID (consumer) classes. An essential issue in audio is synchronization of the data streams.

USB Audio Class 2.0 - Converting 24 bit audio to 32 bits ...

    https://community.atmel.com/forum/usb-audio-class-20-converting-24-bit-audio-32-bits
    Hi everyone, I've been working on programming a USB Audio Class 2.0 device on a SAM3U chip. Right now I'm having trouble converting the 24 bit audio stream into a 32 bit audio stream to play happily with the DMAC and SSC peripherals.

Atmel AT06475: SAM D21 USB - Microchip Technology

    https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-42261-SAM-D21-USB_Application-Note_AT06475.pdf
    asynchronous USB Audio applications to provide an explicit feedback on the isochronous endpoints usage in the device. It provides a mechanism to the host on adjusting the data rate based on the device operation. A feedback endpoint is an interrupt endpoint having the same endpoint number as the isochronous endpoint but operating in the

Atmel AVR4950: ASF - USB Host Stack

    https://ww1.microchip.com/downloads/en/DeviceDoc/doc8486.pdf
    Atmel AVR4950 3 8486A-AVR-02/12 3 USB host application notes Several USB host examples are provided by Atmel. For each example, Atmel provides several application notes. Figure 3-1. USB host application notes. Basic USB knowledge is necessary to understand the USB host class application notes (Classes: HID, CDC, MSC, PHDC, AUDIO).

Atmel AVR32839: AVR UC3 Audio Player

    https://ww1.microchip.com/downloads/en/AppNotes/doc32177.pdf
    initialize them using the USB Mass Storage class – Audio codec tasks: these tasks manage the audio decoding Here is an example of a player implementing an MP3 and WMA decoders. #define task() \ {\ task_usb(); \ task_usb_ms(); \ task_mp3(); \ task_wma(); \} It should be noted that the Atmel AVR UC3 Audio Player also supports digital music streaming

Atmel AVR4901: ASF - USB Vendor Class Application

    https://ww1.microchip.com/downloads/en/Appnotes/doc8481.pdf
    Atmel AVR4901: ASF - USB Vendor Class Application. Features. • USB 2.0 compliance. - Chapter 9 compliance. - Full Speed (12Mbit/s), High Speed (480Mbit/s) data rates. • Control, Bulk, Isochronous and Interrupt transfer types. • Small stack size frees space for main application.

Now you know Atmel Usb Audio Class

Now that you know Atmel Usb Audio Class, we suggest that you familiarize yourself with information on similar questions.