We have collected the most relevant information on Ati Hdmi Audio Device Only Stereo. Open the URLs, which are collected below, and you will find all the info you are interested in.


ATI HDMI stereo only - Windows 10 Forums

    https://www.sevenforums.com/drivers/195856-ati-hdmi-stereo-only.html
    I have a gigabyte mobo with onboard Realtek audio AL889A. This machine is used as a Media Center pc connected thru a Yamaha RX-V667. Everything worked great until I had a harddrive crash. Repalced drive and now can only set ATI HDMI audio to stereo. I've seen plenty of threads on this issue but no real solutions.

Only stereo sound available in Win 10 | Tom's Guide Forum

    https://forums.tomsguide.com/threads/only-stereo-sound-available-in-win-10.193078/
    I tried it (Dolby) a few months ago and now see that only stereo sound is available (all the other options are grayed out). Under sound properties, it shows only 2 channels available. System is Dell Vostro 220 running Win 10 x64 ATI HD5450 video card with HDMI output connected to Sony 770 AVR in turn connected by HDMI to the TV (pass through)

Only Stereo Sound Output via HDMI Cable When 5.1 Available ...

    https://answers.microsoft.com/en-us/windows/forum/all/only-stereo-sound-output-via-hdmi-cable-when-51/7658829e-671b-43d6-aaf1-20e72b5ceaea
    But all the options in Windows are for stereo 2.0 output only - all the options for 5.1 or greater output are greyed out. It insists I only have access to two speakers. The device manager confirms that audio output is via AMD HDMI Audio and is functional. Dell support are a no-go as they won't touch any of their products that are over 5 years ...

Download the latest version of ATI HDMI Audio Device ...

    https://ccm.net/download/download-24180-ati-hdmi-audio-device-driver
    The ATI HDMI Audio Device Driver is a software complement to your sound card that enables you to benefit from your PCs audio capabilities. It works with ATI and ATI Radeon chipsets that support the following codecs: ALC882, ALC883, ALC885, ALC886,...

ATI Radeon HD 4550 & HDMI : only stereo (with radeonhd ...

    https://www.phoronix.com/forums/forum/linux-graphics-x-org-drivers/open-source-amd-linux/18331-ati-radeon-hd-4550-hdmi-only-stereo-with-radeonhd
    11 March 2010, 01:52 PM. AFAIK the ALSA HDMI driver for Radeon cards supports only 2 PCM channels at the moment. But if your receiver can decode DD or DTS you can pass-through this signal and get your surround sound. For me it works like this in MPlayer: Code: mplayer -ao alsa:device=hw=HDMI,3 -afm hwac3 somefile.mkv.

4850 with HDMI - Stereo only | AVForums

    https://www.avforums.com/threads/4850-with-hdmi-stereo-only.920605/
    1) Make sure to get Catalyst 08.12 from ATI/AMD's website 2) Get Realtek HD Audio Codecs Driver 2.09 Windows Vista (32/64) 3) Connect the (DVI/DVI2HDMI) to HDMI Input 1 on the Onkyo 4) Turn of Audio TV Out on the Onkyo (Setup - Hardware Setup - HDMI) 5) Go into Windows Sound controll Panel and configure your speakers.

Now you know Ati Hdmi Audio Device Only Stereo

Now that you know Ati Hdmi Audio Device Only Stereo, we suggest that you familiarize yourself with information on similar questions.