We have collected the most relevant information on Asterisk Slow Choppy Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
Choppy audio on recordings - Asterisk Support - Asterisk ...
https://community.asterisk.org/t/choppy-audio-on-recordings/46164
Hello, We are having an issue of “choppy” audio on recordings made using MixMonitor (actually, a queue configured with monitor-type=MixMonitor, but that’s the same thing, right?). Audio during the call is perfect, however. It’s just the recordings that are getting messed up. On the recording, the incoming audio (which comes from an ISDN gateway) is fine, but the audio from the ...
Choppy Lines or Call Breaks on Asterisk | Avoid Choppy ...
https://www.didforsale.com/choppy-lines-or-call-breaks-on-asterisk
Choppy lines or call breaks on Asterisk. Choppy line is a common problem when we use SIP signaling. The main reasons for the issue are Bandwidth, Codec, Lots of SIP Trunks registered, and Jitter. Basic checklist for Choppy Lines. Check if Codec ULAW, ALAW or G729 is allowed on your SIP Trunks. If allowed try to use any single codec to avoid choppy lines.
#482997 - asterisk: Extremely choppy sound and high CPU ...
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=482997
tags 482997 + confirmed thanks Torgeir Skjøtskift wrote: > When making calls involving IAX2 channels, sound is extremely choppy > and CPU usage spikes. > > Messages on the CLI indicate problems while channels are active: > WARNING[12301]: File chan_iax2.c, Line 4436 (socket_read): Received > mini frame before first full voice frame > > IAX2 registry entries …
Sound quality problems (Choppy) - Asterisk PBX - Spiceworks
https://community.spiceworks.com/topic/165774-sound-quality-problems-choppy
Have you looked at CPU usage on the Asterisk box during the times you are getting choppy audio? I experienced this once and the problem was the CPU was running at near 100% during the events. The deployment was about 3 times larger than yours. The solution was to move the Asterisk install to a more robust box.
Asterisk AGI -> Bash-Script -> causes choppy audio
https://serverfault.com/questions/1064831/asterisk-agi-bash-script-causes-choppy-audio
After that, the audio was choppy in both ways for all running channels, when the AGI-Script gets executed. After disabling AGI the service returned to normal. If we have 30 concurrent calls and AGI will be executed, the audio of all 30 calls will stop until the AGI-Script is fully processed. Asterisk v11.8.1
Choppy Outbound Audio - VM or Slow Upload Speeds? : Asterisk
https://www.reddit.com/r/Asterisk/comments/4ajx3z/choppy_outbound_audio_vm_or_slow_upload_speeds/
Choppy Outbound Audio - VM or Slow Upload Speeds? I'm trying to run an Asterisk VM using Twilio's SIP service. I've tried a few different Distros - FreePBX, PBIAF (both the dist and OVA), Asterisk Now, and every single one seems to have issues …
Random choppy audio on calls - General Help - FreePBX ...
https://community.freepbx.org/t/random-choppy-audio-on-calls/36093
You can watch the audio packets passing from the Asterisk CLI with rtp set debug on each packet will be displayed if there is not an almost perfect sequence of Sent/Got then you will get “choppy audio” if you get “choppy packets” that then you need to investigate every “route” between you and your VSP, generally it will be your ISP not your VSP.
Now you know Asterisk Slow Choppy Audio
Now that you know Asterisk Slow Choppy Audio, we suggest that you familiarize yourself with information on similar questions.
