Art Pro Audio - Djpre-2 Interface

We have collected the most relevant information on Art Pro Audio - Djpre-2 Interface. Open the URLs, which are collected below, and you will find all the info you are interested in.

DJPRE II – Phono Preamplifier – ART Pro Audio

https://artproaudio.com/product/djpre-ii-phono-preamplifier/

Overview The DJ PRE II (formerly named the “Phono MicroPRE”) acts as an interface between your turntable and your audio recording / playback system. …

ART Pro Audio DJPre-2 Phono Preamp | Long & McQuade

https://www.long-mcquade.com/839/Pro-Audio---Recording/DJ/ART-Pro-Audio/DJPre-2-Interface.htm

Description Reviews The DJ PRE II (formerly named the "Phono MicroPRE") is the perfect solution for connecting a turntable to any analog low impedance line input (mixer, soundcard or DAW). The input capacitance can be switched between 100pF and 200pF to …

ART Pro Audio DJ PRE II Phono Preamplifier - Interfaces ...

https://musicstorelive.com/art-pro-audio-dj-pre-ii-phono-preamplifier.html

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine.

Amazon.com: ART DJPREII Phono Preamplifier : Electronics

https://www.amazon.com/ART-DJPREII-Phono-Preamplifier/dp/B000AJR482

Phono Preamplifier Artcessories - ART Pro Audio

https://artproaudio.com/framework/uploads/2018/06/DJPREII_Manual_A6_V1.3.pdf

2. Connect the turntable leads to the Input connectors on the DJPRE II. 3. If the turntable has a separate ground wire, attach it to the Ground terminal on the DJPRE II to reduce hum. 4. Connect the RCA or outputs to the appropriate inputs on your mixer or stereo receiver (Aux input, or an unused tape input). If the mixer does not have RCA

Now you know Art Pro Audio - Djpre-2 Interface