Amps Rugged Mount With Audio/Power Cable Installation

AMPS Rugged Mount - GPS City

https://www.gpscity.ca/pdfs/manuals/MONT6MNTPOW-EN-MANUAL.pdf

1. Thread the screws through the washers , mount , and AMPS mount base plate (not included). 2. Tighten the nuts to secure the base plate. The recommended torque is 15–20 lbf-in (1.7 to 2.25 Nm). installing Your Montana in the Mount notice Before placing the device in the mount, ensure that the metal contacts on the device and the mount are dry to avoid equipment damage. Use …

AMPS Rugged Mount with Audio/Power Cable | Garmin

https://www.garmin.com/en-US/p/89575

Amazon.com: Amps Rugged Mount with aud.-power : …

https://www.amazon.com/Amps-Rugged-Mount-with-aud-power/dp/B0055BJBMC

AMPS Rugged Mount with Audio/Power Cable | Garmin Support

https://support.garmin.com/en-US/?partNumber=010-11654-01&tab=manuals

Garmin Support Center is where you will find answers to frequently asked questions and resources to help with all of your Garmin products.

AMPS Rugged Mount with Audio/Power Cable | GARMIN

https://www.garmin.com/en-US/p/717487

Rugged Mount Instructions Installation Instructions

https://static.garmin.com/pumac/RAM_Rugged_ML.pdf

Thread the screws through the washers , mount , and AMPS mount base plate . 2. Tighten the nuts to secure the base plate. NOTE: The recommended torque is 1.7 to 2.25 N-m (15-20 lbf-in.). Installing the Device in the Mount. NOTICE Before you place the device in the mount, ensure that the metal contacts on the device and the mount are dry.

Garmin AMPS Rugged Mount with Audio/Power Cable (010-11654 …

https://www.solidsignal.com/garmin-amps-rugged-mount-with-audio-power-cable-010-11654-01

The Garmin 010-11654-01 AMPS Rugged Motorcycle Mount for Montana Series, kit allows you to attach your Montana unit to your motorcycle or ATV and take it on the road. The Garmin Mount with Audio/Power Cable kit includes the mount, hardware (AMPS arm/ball socket sold separately) and a cable with bare power/audio/data wires.