We have collected the most relevant information on 6146 Se Audio Amplifier. Open the URLs, which are collected below, and you will find all the info you are interested in.
A Single 6146 Amplifier - QRO
http://qro.it/amp/schemi/pdf/59hb196.pdf
If preferred, a coaxial Fig. 6-64—The base for the 6146 amplifier is a 11 X 7 X 3-inch aluminum chassis. A 6 X 6 X 6-inch aluminum box encloses the amplifier tube and its output circuit. S2 is to the right of the meter. Below, from left to right, are controls for S3, C7 and C4.
6146 Amp Feasibility | diyAudio
https://www.diyaudio.com/community/threads/6146-amp-feasibility.359775/
Internally and electrically 6146 is very similar to 807, the main difference between 6146 and 807 is the size of the glass bottle The 6146 is a completely different animal. An 807 is essentially a 6L6G with a 5 pin base and a plate cap. A 6146 has …
The AA8V 6146B Amplifier - Amplifier Schematic …
https://www.frostburg.edu/personal/latta/ee/6146amp/schematic/6146schematic.html
The amplifier bias circuit applies adjustable regulated bias to the 6146B control grid. The use of regulated bias results in improved linearity, important when the amplifier is used for SSB service. To avoid the expense of a separate power transformer, a filament transformer is
6146 Family of Vacuum Tubes | Amplified Parts
https://www.amplifiedparts.com/tech-articles/6146-family-tubes
The 6146A has what RCA calls the "dark heater". This "dark heater" is supposed to be more resilient to vibration, work well at a larger "range" of voltage, etc. Otherwise, the 6146 and the 6146A are the same tube. In mid-1964 RCA introduced the 6146B with the "claim" of 33.33 percent higher power input than the 6146 / 6146A.
6146 Tubes - Tubes - Transmitting, Audio, Misc.
https://www.rfparts.com/tubes/tubes-6146.html?p=1
6146W GE Transmit Beam Power Amplifier Tube, Matched Set (3) Not recommended for Kenwood. $169.91. Add to Cart. 6146W GE Transmitting tube, Matched set of 3, Beam Power Amplifier. This tube is not recommended for Kenwood. New Old Stock * No longer available for export. MFR: GE/JAN. SKU: 6146-M3-GE. Made in the USA.
Can I use 6146 or 6883 tubes as an audio amp? - Antique Radios
https://www.antiqueradios.com/forums/viewtopic.php?t=124046
Location: Amherst, NH. Acrosound developed a TO-350 for use with the 6146 as an audio ampliifer. It was 6,600 ohms plate-plate with a tertiary screen winding. The screen ratings on the 6146 are limited. Altec used the 6146 as an output tube in …
Now you know 6146 Se Audio Amplifier
Now that you know 6146 Se Audio Amplifier, we suggest that you familiarize yourself with information on similar questions.
