We have collected the most relevant information on 2nd Zone Audio Pre Out. Open the URLs, which are collected below, and you will find all the info you are interested in.
DENON X3500H and outputs ZONE 2, PRE OUT | AVForums
https://www.avforums.com/threads/denon-x3500h-and-outputs-zone-2-pre-out.2259002/
There's an option within the Zone2 setup configurations entitled HDMI AUDIO. Set this to PCM. This will convert audio sourced via the HDMI inputs to PCM and allow it to be conveyed via the Xone2 pre outs. There's also a VOLUM LEVEL option that allow you to have either a FIXED or VARIABLE volume in association with the second zone.
Two zones, pre-out question | Audioholics Home Theater Forums
https://forums.audioholics.com/forums/threads/two-zones-pre-out-question.74302/
You can use the zone 2 pre-out to feed an additional amplifier and connect all the zone 2 speakers to it. In that case, the receiver doesn't power the zone and you can retain 7.1 in the main zone. If the receiver is powering zone 2, you can only have 5.1 in the main zone when zone 2 is active.
AVR/Amplifier Volume Level Control for ZONE2 PRE-OUT
https://support.denon.com/app/answers/detail/a_id/4738/~/avr%2Famplifier-volume-level-control-for-zone2-pre-out
The volume output level for ZONE2 PRE-OUT is set by default to "Variable". If you want to control the volume for ZONE2 PRE-OUT only from the amplifier it is connected to, then you will have to switch the ZONE2 "Volume Level" setting from "Variable" to the "Volume Scale" setting, which allows you to set a fixed level of your preference. To do this, access the setup menu and select …
zone 2 pre out vs audio out | AVS Forum
https://www.avsforum.com/threads/zone-2-pre-out-vs-audio-out.2069850/
RCA cables likely mean there is a Russound amp being used, such that you would connect the RCA cables to the Zone 2 pre-outs on the AVR; however, in order to pass audio from other than Networking or USB sources, you'll need to add an analog cable from the source to the AVR (in addition to the HDMI cable for the main zone audio).
Difference between pre-outs and zone-outs? - ecoustics.com
https://www.ecoustics.com/electronics/forum/home-audio/51414.html
The voltage from the pre out is determined by the volume control on the pre amp. Unlike what most people assume, a pre amp runs at full voltage when in use. The volume control simply trims the voltage to the desired level. A zone output can be whatever the manufacturer decides it should be. Some have adjustable volume on the front of the pre ...
Pre-Out/Line-Out-- Help Understanding and Using - Home ...
https://community.klipsch.com/index.php?/topic/164749-pre-outline-out-help-understanding-and-using/
Usually Zone 2 is just stereo. The old Yammy AVR will be acting as an integrated stereo amplifier for the input signal from the primary AVR. You just decide what input on the Yammy you want to use for this. I'd probably use the VCR input. The …
Now you know 2nd Zone Audio Pre Out
Now that you know 2nd Zone Audio Pre Out, we suggest that you familiarize yourself with information on similar questions.
