We have collected the most relevant information on 1 Meg Reverse Audio Pot. Open the URLs, which are collected below, and you will find all the info you are interested in.


1 Meg Reverse Audio Potentiometer | TalkBass.com

    https://www.talkbass.com/threads/1-meg-reverse-audio-potentiometer.609219/
    You can get them from Mouser. They have an Alpha 1M reverse audio pot, part number: 313-1540F-1M But you really don't need it. Just use a linear taper. It works fine. {edit} Same part posted by luzceloffan

CTS 1 Meg Audio Taper Guitar Volume & Tone Pot

    https://guitarelectronics.com/cts-1-meg-audio-taper-pro-guitar-pot-w-brass-shaft/
    Product Description. CTS 1 Meg Ohm audio taper pro guitar pot with brass shaft. These are the highest grade pots available from CTS. Unlike most standard CTS pots that have pot metal threaded bushings and aluminum shafts, our CTS pots are custom made with solid brass shafts and brass threaded bushings that provide a super smooth feel with low noise operation and …

Bourns 1Meg Audio Guitar Pot w/ Push-Pull Switch

    https://guitarelectronics.com/bourns-1meg-audio-taper-guitar-pot-w-push-pull-switch/
    Bourns Push/Pull Pot Specs; Ohms: 1 Meg : Taper: Audio: Tolerance: +/-15% : Pot Diameter: Shaft Material: Aluminum : Threaded Shaft Length: 3/8" (.375") Shaft Type: Split Knurled : Threaded Shaft Material: Brass: Spline Count(Type): 18 (Coarse) Threaded Shaft Diameter: 3/8" (.375") Spline Height: 3/8" (.375") Thread Pitch: 3/8-32NEF: Required Cavity Depth: 1.05"

Will wiring a 1meg audio taper "backwards" make a reverse ...

    https://www.thegearpage.net/board/index.php?threads/will-wiring-a-1meg-audio-taper-backwards-make-a-reverse-log-pot.2305407/
    I want to make a bass cut control in my LP style guitar and I've found that a reverse log pot works best. I can only find small 1meg reverse log (C1M). Unfortunately these have shafts that are too short to fit through the top. Would wiring a full size 1meg log in reverse get me the same amount...

Amazon.com: Allparts CTS 1 Meg Solid Shaft Audio Pot ...

    https://www.amazon.com/Allparts-CTS-Solid-Shaft-Audio/dp/B002HHWSA4
    1 Meg Audio Taper Potentiometer CTS, Solid Shaft, With Hardware. Knobs to fit - MK 0110-001 Nickel Dome; MK 0110-002 Gold Dome; MK 0110-003 Black Dome; MK 0110-010 Chrome DomeMK 0115-001 Nickel Flat Top; MK 0115-002 Gold Flat top; MK 0115-003 Black Flat top; MK 0115-010 Chrome Flat top

Chasing the 1MegC - 1 Meg Reverse Audio Taper: Where to ...

    https://forum.seymourduncan.com/forum/the-pickup-lounge/307841-chasing-the-1megc-1-meg-reverse-audio-taper-where-to-find-it
    Chasing the 1MegC - 1 Meg Reverse Audio Taper: Where to find it? 05-29-2016, 04:02 PM I am trying to repair the electronics of my G&L Legacy, and the pot controlling the bass is an oddball pot, according to ItsaBass.

1 meg pots | Telecaster Guitar Forum - TDPRI

    https://www.tdpri.com/threads/1-meg-pots.395633/
    Here's a recent trick I stumbled onto with a 1 meg reverse audio taper pot used as a volume. You can use the volume in a way that is quite effective and with differing results than a typical pot. If you hook the pot up backwards, meaning that the middle lug is the input and lug three is the output, you get a cool effect from how the pickups and pot interact.

Guitar Amp and Pro Audio Potentiometers

    https://www.amprepairparts.com/pots.htm
    POT - Revisit™, DUAL 1 MEG AUDIO, 3/8" BUSHING Made by Alpha. 24 mm carbon composition. 300 ° rotation. 1/2 watt, 500VDC rating. 1/4" diameter shaft, 3/8" bushing, solder lugs. This pot is used most often for a post-phase inverter master volume (PPIMV) control on many amplifiers.

Potentiometers — Allparts Music

    https://www.allparts.com/collections/potentiometers
    1 Meg ohm audio taper potentiometer CTS, solid shaft, with hardware. EP-5585 Premium CTS 250K Push-Pull Split Audio Pot from $11.50 . 250K CTS Push-Pull DPDT pot, audio taper, 10% tolerance, split shaft, with hardware. EP-5286-000 Bourns 500K Push/Pull Pot $8.50 500K ohm push/pull audio taper pot, Bourns, split shaft, with hardware. ...

Guitar Parts Factory :: CTS POTENTIOMETERS

    https://www.guitarpartsresource.com/electrical_ctspots.htm
    CTS 1 meg audio taper potentiometer. 6mm split shaft with 3/8" long threaded bushing. Includes nut and dress washer. For tone or volume controls. Requires 3/8" mounting hole. $5.99

Now you know 1 Meg Reverse Audio Pot

Now that you know 1 Meg Reverse Audio Pot, we suggest that you familiarize yourself with information on similar questions.